Connecting a Compatible Bluetooth Device
You can play media from a compatible Bluetooth device using the Bluetooth wireless connection.
You can control the music playback with the media app on a Bluetooth device or using the Fusion-Link remote
control app (
Fusion-Link Wireless Remote Control App, page 53
).
1 Select the BT source.
2 Select
> Connections > Visible to make the stereo visible to your compatible Bluetooth device.
3 Enable Bluetooth on your compatible Bluetooth device.
4 Bring the compatible Bluetooth device within 10 m (33 ft.) of the stereo.
5 On your compatible Bluetooth device, search for Bluetooth devices.
6 On your compatible Bluetooth device, select the stereo from the list of detected devices.
7 On your compatible Bluetooth device, follow the on-screen instructions to pair and connect to the discovered
stereo.
When pairing, your compatible Bluetooth device may ask you to confirm a code on the stereo. The stereo
does not display a code, but it does connect correctly when you confirm the message on the Bluetooth
device.
8 If your compatible Bluetooth device does not immediately connect to the stereo, repeat steps 1 to 7.
The Visible setting is disabled automatically after two minutes.
NOTE: on some Bluetooth devices, adjusting the volume on the device affects the volume level on the stereo.
Bluetooth Range Information
The stereo and Bluetooth wireless devices have a range of 10 m (33 ft.). For optimal performance, the Bluetooth
wireless device should also have a clear line of sight to the stereo.
Selecting a Different Bluetooth Device
When you have more than one Bluetooth device paired to the stereo, you can select a different device when
needed. You can pair the stereo with up to eight Bluetooth devices.
1 With the BT source selected, select
> Connections > Paired Devices.
2 Select a Bluetooth device.
Bluetooth Source Settings
With the BT source selected, select
> Connections.
Visible: allows the stereo to be visible to Bluetooth devices. This setting turns off automatically after two
minutes to prevent possible interruption to audio after pairing a Bluetooth device to the stereo.
Remove Device: removes the Bluetooth device from the stereo. To listen to audio from this Bluetooth device
again, you must pair the device again.
Music Playback and Stereo Features
39
Содержание VIEO RV 1050 Series
Страница 1: ...VIEO RV850 RV1050SERIES Owner smanual ...
Страница 8: ......
Страница 81: ......
Страница 82: ...support garmin com GUID F2A144DD 76F7 44EF AADF 270AAAC241A9 v3 December 2021 ...