Garmin VENU SQ 2, Руководство пользователя

Страница: 59 / 72

Device Information
About the AMOLED Display
By default, the watch settings are optimized for battery life and performance ( Maximizing Battery Life,
page 57 ).
Image persistence, or pixel "burn-in," is normal behavior for AMOLED devices. To extend the display life, you
should avoid displaying static images at high brightness levels for long time periods. To minimize burn-in, the
Venu Sq 2 display turns off after the selected timeout (
Customizing the Display Settings, page 52 ). You can turn
your wrist toward your body, double-tap the touchscreen, or press a button to wake the watch.
Charging the Watch
WARNING
This device contains a lithium-ion battery. See the Important Safety and Product Information guide in the product
box for product warnings and other important information.
NOTICE
To prevent corrosion, thoroughly clean and dry the contacts and the surrounding area before charging or
connecting to a computer. Refer to the cleaning instructions (
Device Care, page 55 ).
1 Plug the small end of the USB cable into the charging port on your watch.
2 Plug the large end of the USB cable into a USB charging port.
The watch displays the current battery charge level.
Viewing Watch Information
You can view the unit ID, software version, regulatory information, and license agreement.
1 From the watch face, hold .
2 Select System > About.
Viewing E-label Regulatory and Compliance Information
The label for this device is provided electronically. The e-label may provide regulatory information, such as
identification numbers provided by the FCC or regional compliance markings, as well as applicable product and
licensing information.
Hold for 10 seconds.
Device Information 53