Garmin TREAD OVERLAND EDITION Скачать руководство пользователя страница 67 | Manualshive

Страница: 67 / 76

Garmin TREAD OVERLAND EDITION Скачать руководство пользователя страница 67

Connecting Accessories

NOTICE

Do not use the device to control or power a winch. Failure to follow this notice could cause damage to your
vehicle or your device.
Do not connect a power source to an accessory output terminal. Failure to follow this notice could cause
damage to your vehicle or your device.

Accessory requirements:
• Verify the amperage rating of each accessory before wiring it to the | device. The device supports

accessories up to 30 A for each channel and a maximum of 100 A for the entire system.

• Use 10 AWG (6 mm

2

) wires for accessories that use 20 to 30 A.

• Use 12 AWG (4 mm

2

) wires for accessories that use 10 to 20 A.

• Use 14 AWG (2.5 mm

2

) wires for accessories that use less than 10 A.

• Use the appropriate size terminals for all accessory connections.
• Crimp all terminal connectors securely.
1 Connect the positive wire from the accessory | to one of the accessory terminals | on the | device.

2 Connect the negative or ground wire to an unpainted ground stud on the vehicle frame, to a ground

distribution block or directly to the negative terminal on the battery.

NOTICE

Do not connect the accessory ground wires to the ground terminal (GND) on the | device. Failure to heed this
notice could result in personal or property damage or negatively impact device functionality.

Appendix

61

«
...
65
66
67
68
69
...
»

Содержание TREAD OVERLAND EDITION













































































Отзывы:

Нет отзывов