Trail Guide
™
Owner’s Manual
E
N
G
ettInG
s
tarted
>
t
urnInG
the
t
raIl
G
uIde
o
n
and
o
ff
Turning the Trail Guide On and Off
Press and hold the
Power
key on the front of the unit to turn
it on or off. When turned on, the Welcome page appears briefly,
followed by a Safe Driving Warning Message. Press
OK
to
acknowledge the message, or wait briefly until the Map page
appears. Your Trail Guide automatically starts searching for
satellite signals to find your current location.
Turning off Satellite Reception for Indoor Use
You can set your Trail Guide to indoor use, which stops satellite
reception and conserves battery power. Thoroughly familiarize
yourself with the routing features of the Trail Guide by
simulating routes.
To turn off satellite reception:
1. Press
PAGE
to open the Map page.
2. Press
MENU
.
3. Highlight
Use Indoors,
and press
OK
. GPS is disabled.
To turn on satellite reception:
1. Press
PAGE
to open the Map page.
2. Press
MENU
.
3. Highlight
Acquire Satellites,
and press
OK
. GPS is
enabled, and your Trail Guide begins to acquire satellite
signals.
