Garmin SL30 GNS 480TM, Руководство пилота

Страница: 17 / 56

11
Advanced Operation
Com Mode
3. Press ENT . The right side of the display will show “
store as
” with a flashing cursor at the first
character of the name.
4. Use the LARGE and SMALL knobs to enter the previously used name and frequency type.
5. Press ENT . The previously used name and frequency are now replaced with your new entry.
Recalling Com Channels
There are several lists of channels that you can recall from memory, they are: remote chan-
nels, the ten most recently used channels, user-stored channels, weather channels, and the
emergency channel. The lists available depend on your installation. Pressing
eNT selects this
entry as the standby channel. Press the Flip/FlOp button to select this entry as the active
channel.
Auto Stored
List
(AUTO)
User
Memory
(USER)
Weather
Emerg.
Channel
Remote Comm
Frequencies
First
Last
First
Last
Press to insert into Standby. Press to insert into Active.
Comm Stored Frequencies
Turn LARGE Knob , then turn SMALL knob . Press .
First
Last
First
Last