RV-BBT600 SERIES
INSTALLATION
INSTRUCTIONS
Important Safety Information
WARNING
See the
Important Safety and Product Information
guide in the
product box for product warnings and other important
information.
NOTICE
Failure to follow these cautions could result in damage to the
vehicle or poor product performance.
This device must be installed according to these instructions.
Disconnect the vehicle's power supply before beginning to install
this product.
Before applying power to this product, make sure it has been
correctly grounded according to the installation instructions.
You must read all installation instructions before beginning the
installation. If you experience difficulty during the installation,
contact Garmin
®
Product Support.
Connector Identification
Item Label
Connector
Description
Notes
MIC
Microphone input
3.5 mm mono miniplug for
the hands-free microphone
(included)
VIDEO IN
Video input
Composite video RCA
connector
ZONE 1 LINE
OUT
Line out for zone 1 Left, right, and subwoofer
RCA connectors
Item Label
Connector
Description
Notes
None
Wiring harness
connectors
The wiring harnesses are
not included. See (
) for
pinout information.
ZONE 2 LINE
OUT
Line out for zone 2 Left, right, and subwoofer
RCA connectors
AUX 1 INPUT Auxiliary input 1
Left and right RCA
connectors
ZONE 3 LINE
OUT
Line out for zone 3 Left, right, and subwoofer
RCA connectors
CAMERA
AUDIO
INPUT/AUX 2
INPUT
Input for camera
audio or for
auxiliary 2
Left and right RCA
connectors
ZONE 4 LINE
OUT
Zone 4 line out
Left, right, and subwoofer
RCA connectors
USB (500mA)
Reserved for manufacturer
use
Compatible only with low-
current (<500 mA) USB
devices
iPad
USB (2.1A)
Interfaces and charges
supported smartphones and
USB devices
CAN 1
CAN BUS 1
Connects to an NRX wired
remote control using an
adapter (sold separately)
CAN 2
CAN BUS 2
Reserved for vehicle
integration
N/A
AM/FM antenna
Connects to the vehicle
antenna. The included
adapter may be required.
Pin Identification
You can use this pinout diagram and table to create a wiring
harness for this device.
Pin
Function
Speaker: zone 2 left positive (+)
Speaker: zone 2 left negative (-)
Speaker: zone 1 left positive (+)
Speaker: zone 1 left negative (-)
Speaker: zone 1 right positive (+)
Speaker: zone 1 right negative (-)
Speaker: zone 2 right positive (+)
Speaker: zone 2 right negative (-)
Ignition switch positive (+12 Vdc input)
Power ground (-)
GUID-EFC21AFA-2D40-45E8-8E4C-6A9EFBF01CB9 v4
July 2020
