Rino 520HCx and 530HCx Owner’s Manual
3
M
aIn
M
enu
Averaging a Waypoint
Averaging a waypoint location increases the accuracy of
a waypoint at your current location by taking multiple
position readings and averaging the results.
To average a waypoint:
Select
Average Location
from the options list or
the
Avg
button on the Mark Waypoint page when
marking a new waypoint only.
Projecting a Waypoint
Project a waypoint from any map item to establish a new
waypoint on a bearing projected from that item.
To project a waypoint:
1. Select a map item from the Find Menu.
2. Open the option menu and select
Project
Waypoint
.
3. Select either the bearing or distance field, then
press
Enter
to open the numerical keyboard. Enter
the new bearing or distance, then select
OK
.
Project Waypoint Page
Enter
distance
Enter
direction
To edit a waypoint:
Use the Find Menu to view the waypoint/contact or
select it on the Map page and press
Enter
.
To move a waypoint by dragging it:
1. Use the Find Menu to view the Waypoint page for
the waypoint you want to move.
2. Select the
Map
button to view the waypoint.
3. With the waypoint selected by the panning arrow,
press in and release
Enter
. The word “Move”
appears beneath the panning arrow.
4. Use the panning arrow to drag the waypoint to the
new location and then press
Enter
to place it.
