Garmin Oregon 750, Быстрый старт

Страница: 12 / 55

Oregon
®
750
11
EN
1 Turn the D-ring counter-clockwise,
and pull up to remove the cover.
2 Insert two AA batteries, observing
polarity.
3 Replace the battery cover, and turn
the D-ring clockwise.
4 Hold .
5 Select > Setup > System > Battery
Type .
6 Select Alkaline , Lithium , NiMH, or
Rechargeable NiMH .
Installing the NiMH Battery Pack
The device operates using the optional
NiMH .battery pack (not included with
all models) or two AA batteries
(page
10) .
1 Turn the D-ring counter-clockwise,
and pull up to remove the cover.
2 Locate the battery pack
1
.
3 Insert the battery pack, observing
polarity.
4 Gently press the battery pack into
place.
5 Replace the battery cover, and turn
the D-ring clockwise.
Charging the Battery Pack
NOTICE
To prevent corrosion, thoroughly dry
the USB port, the weather cap, and the
surrounding area before charging or
connecting to a computer.
Do not attempt to use the device to
charge a battery that was not provided
by Garmin
®
. Attempting to charge
a battery that was not provided by
Garmin can damage the device and void
the warranty.
Before you can connect the straight
connector of the USB cable to your
device, you may need to remove
optional mount accessories.
NOTE : The device does not charge when
outside the approved temperature
range
(page 18) .