nüvi 200 and 200W series owner’s manual
Getting Started
Adding a Stop
You can add a stop (called a Via
Point) to your route. The nüvi gives
you directions to the Via Point and
then to your final destination.
1. With a route active, touch
Menu
>
Where to?
.
2.
Search for the extra stop.
3. Touch
Go!
.
4. Touch
Add as Via Point
to
add this stop before your
destination. Touch
Set as new
Destination
to make this your
final destination.
Taking a Detour
1. With a route active, touch
Menu
.
2. Touch
Detour
.
The nüvi attempts to get you
back on your original route as
quickly as possible. If the route
you are currently taking is the only
reasonable option, the nüvi might not
calculate a detour.
Stopping the Route
1. With a route active, touch
Menu
.
2. Touch
Stop
.
Adjusting the Volume
From the Menu page, touch
Volume
(or
). Touch and to adjust
the volume. Touch the box next to
Mute
to mute all audio.
Locking the Screen
To prevent accidental screen touches,
slide the
Power
key to the right
( ). To unlock the screen, slide the
Power
key to the center position.
