Garmin NavComm SL30, Руководство по установке, Страница: 10 / 88

Introduction
2 Apollo SL30 Installation Manual
F
EATURES
G
ENERAL
F
EATURES
•
32 character high-intensity alphanumeric LED display
•
Sunlight readable full alphanumeric display
•
Automatic display intensity
•
Back-lit buttons
•
200 channel memory (stored alphabetically)
•
Remote frequency flip-flop input pin
N
AVIGATION
R
ADIO
F
EATURES
•
200 channel Nav with solid state DSP technology
•
VOR/Localizer and Glideslope receivers
•
Built-in VOR/Localizer converter
•
Frequency range: VOR 108.00 – 117.95 MHz
Localizer 108.00 – 111.95 MHz
Glideslope 328.60 – 335.40 MHz
•
Digitally decoded OBS setting
•
Manual selection of back course approach
•
Automatic display of station ID by decoding Morse code
•
Interfaces to most CDI (w/resolver), HSI, and autopilot systems
•
VOR receiver displays To or From radial of the active channel
•
VOR monitor displays From radial of the standby channel
•
Back course annunciator output
•
LOC enable annunciator output
Figure 1 - SL30 Front Panel