Mounting the Compass with the Cable Routed Outside the Pole
1 If necessary, position the stainless steel pole in the selected location.
2 Route the cable through the pole-mount adapter, and place the cable in the vertical slot along the base of
the pole-mount adapter.
3 Connect the cable to the compass .
4 Place the compass on the pole-mount adapter and fasten the included M4 screws to secure it.
5 Screw the included metal nut onto the threaded pole as close to the base as possible.
6 Screw the pole-mount adapter onto the pole, but do not fully tighten it.
7 Apply the included adhesive around the threads of the pole.
8 Align the compass so it is pointed toward the bow of the boat.
NOTE: You can use the sights on top of the compass to help align it.
9 While keeping the compass steady, finger tighten the nut.
10 Using a 35 mm (1
3
/
8
in.) wrench, turn the jam nut
1
/
4
turn to secure it.
11 After the compass is secured on the pole mount, fill the remaining gap in the vertical cable slot with a
marine sealant (optional).
12 Wipe off any excess adhesive or marine sealant.
13 Route the cable away from sources of electronic interference.
5
