GVN 53 Owner’s Manual
5
V
ieWinG
the
M
aP
and
U
SinG
the
t
ooLS
GPS Info Page
Press the
Menu
button twice and select
navigation
>
GpS Info
to view GPS satellite information.
Sky vew
Satellte sgnal
strength bars
The sky view shows the satellites you are receiving. The
satellite signal strength bars indicate the strength of each
satellite you are receiving. A solid bar indicates the GPS
satellite is ready for use.
GPS Settings
Press
Menu
three times to open the Settings menu.
Select
General
>
GpS
. You can also access the GPS
Settings by selecting the
GpS Settings
button on the
GPS Info page.
Use Indoors
—select
Yes
to turn the GPS receiver off.
Set position
—set your position, if Use Indoors is
enabled. Select your location on the map and then select
oK
.
WAAS/EGnoS
—disable and enable WAAS/EGNOS.
WAAS and EGNOS are systems of satellites and ground
stations that provide GPS signal corrections, giving you
even better position accuracy. To learn about WAAS and
EGNOS, visit
Содержание GVN 53 - Navigation System
Страница 1: ...GVN 53 owner s manual...