Garmin GTR 205, Руководство пилота, Страница: 63 / 108

COM
190-02766-02 Rev. A Pilot’s Guide 3-13
Reverse Frequency Look-up
Reverse frequency look-up results are based on GPS position and database
information. If no GPS navigator is present in the system, reverse frequency look-up
text will only appear if the frequency was recently loaded via the Find function.
This function automatically displays the
facility identifier and frequency type for
active and standby frequencies. The unit
verifies the displayed frequency against
the database at least once per minute.
Frequency
Type
Facility
Identifier
“+” denotes more than one type
associated with the frequency.
When Reverse Frequency
Look-up is active, COM
displays:
•
Nearest facility identifier
(if available)
•
Multiple facility indication
(if more than one)
•
Frequency type
•
Approach or Departure
indications (if applicable)
When flying between airports that use
the same frequency, it may take up to
2 minutes for look-up information to
change after crossing the halfway
point.