15-5
190-01007-03 Rev. B
Garmin GTN 725/750 Pilot’s Guide
Foreword
Getting
Started
Audio &
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Charts
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Music
Utilities
System
Messages
Symbols
Appendix
Index
15.1.1 Target Altitude
This sets the desired ending altitude for the VCALC setup.
1. While viewing the VCALC page, touch
Target ALT
.
Numeric
Keypad
Selected
Altitude
Backspace
Key
Figure 15-6 Select VCALC Target Altitude
2. Use the numeric keypad to select the desired Target Altitude
and then touch the
Enter
key.
15.1.2 Altitude Type
This value selects the altitude reference that will be used for VCALC
calculations.
1. While viewing the VCALC page, touch
Altitude Type
.
2. Touching the
Altitude Type
key will toggle between MSL and
Above WPT. "Above WPT" is only available for waypoints that
are airports.
Содержание GTN 750
Страница 417: ......