7-18
GTN 625/635/650 Pilot’s Guide
190-01004-03 Rev. P
Wpt Info
7.8
Create Waypoint
User waypoints are created from the Create User Waypoint page. To create a
new user waypoint, simply enter its name (identifier) and position, or reference
another waypoint by radial and distance.
Waypoint Name
Waypoint
Comment
Temporary
Waypoint
Touch to Set User
Airport Elevation
Touch to Setup
Ref Wpt
Touch to View
Area Map
Touch to Set as User Airport
Figure 7-24 Waypoint Info - Create User Waypoint
1. From the Waypoint Info page, touch the
Create Wpt
key.
2. Touch the
User Identifier
key.
3.
Use the keypad to type the waypoint name (up to six characters)
and then touch
Enter
.
User Waypoint
Name
Alphanumeric
Keypad for
Selected Range
Backspace
Key Clears
Wpt Name
Touch Enter
After Creating
Name
Selected
Character Range
Figure 7-25 Waypoint Info - Create User Waypoint Name
4.
If desired, touch the
Airport
key to make the waypoint a user
airport.
5.
Touch the
Comment
key to add a short comment for the new
waypoint.
6.
Touch the
Position
key and then
LAT/LON
,
Radial/
Radial
, or
Radial/Distance
to assign the type. Refer to the
following instructions for more detail.
Содержание GTN 625
Страница 608: ...This page intentionally left blank ...
Страница 609: ......
Страница 610: ...190 01004 03 Rev P ...