6-14
GTN 625/635/650 Pilot’s Guide
190-01004-03 Rev. P
Proc
The Activate GPS Missed Approach function is the same for the on screen
controls or a remote switch. Activating the missed approach prior to the MAP
can be accomplished on either the Flight Plan or Procedures pages. If using the
Flight Plan page, the approach banner must be touched to display the Approach
Options where Activate Missed Approach can be selected.
Touch the Approach
Banner to Display the
Approach Options
Touch the Desired
Option
Figure 6-22 Approach Option Selection on the Flight Plan Page
Touch the Approach
Banner to Display the
Approach Options
Touch the Desired
Option
Figure 6-23 Approach Option Selection on the Procedures Page
Once an option is selected, the GTN will continue to provide guidance along
the final approach course. Upon reaching the MAP, the unit will automatically
sequence to the first leg of the missed approach. This is used when a pilot needs
to execute the missed approach prior to reaching the MAP.
6.7
Flying an Approach with a Hold
Upon activating an RNAV GPS approach, you are given the option to skip
any non-required holding patterns during the initial transitions of the approach.
The Default NAV page and Flight Plan page displays a timer or distance, as
appropriate, during the holding pattern. Use this timer or distance to fly the
outbound portion of the holding pattern. (The holding pattern is displayed on
the Map page and indicated as the active leg on the Default NAV and Active
Flight Plan pages.)
Содержание GTN 625
Страница 608: ...This page intentionally left blank ...
Страница 609: ......
Страница 610: ...190 01004 03 Rev P ...
