96/96C Owner’s Manual
G
ettInG
S
tarted
>
Installing the Batteries
The GPSMAP 96/96C operates on two AA batteries
(not included), which are located in the back of the
unit. Alkaline or NiMH batteries (see
page 103
setting the battery type) can be used. Stored data is
not be lost when batteries are removed.
To install batteries:
1. Remove the battery cover from the back of
the unit. Turn the D-Ring 1/4 turn counter-
clockwise and then pull.
2. Insert the batteries, observing the proper
polarity. A polarity diagram can be found
molded into the battery compartment.
3. Reinstall the battery cover by reinserting the
locking pin in the back of the unit. Turn the
D-Ring 1/4 turn clockwise to lock in place.
Battery Compartment
Locking
Pin Slot
External Antenna
Connector
(under weather cover)
Power/Data Cable
Connector
(Serial Port)
(under weather cover)
Carry Lanyard
connection
USB Connector
(under weather cover)
Battery
Compartment
Cover
Battery Compartment
Locking D-Ring
Содержание GPSMAP 96 - Hiking
Страница 1: ...GPSMAP 96 96C portable aviation receiver pilot s guide...
Страница 149: ......