Vessel Information
When the chartplotter is connected to a compatible EVC
2.0 Volvo Penta engine, you can view information about
the engine.
From the menu bar, select
My Vessel
>
Status
.
Maintenance Assistant
When the chartplotter is connected to a compatible Volvo
Penta engine, you can view the time to the next engine
service, in engine hours remaining and days remaining.
From the menu bar, select
My Vessel
>
Status
>
Maintenance Assistant
.
After you have serviced the engine, select the engine, and
select Reset Service Reminder.
Oil Level Information
When the chartplotter is connected to a compatible
Volvo Penta engine and an engine oil level sensor or a
transmission oil level sensor, you can view information
about the engine oil level and transmission oil level.
From the menu bar, select
My Vessel
>
Status
>
Oil
Level
.
Driveline Information
When the chartplotter is connected to a compatible Volvo
Penta engine, you can view information about the engine
type, driveline count, drive type, engine rate, electrical
system, and EVC generation.
From the menu bar, select
My Vessel
>
Status
>
Driveline Info
.
EVC Network Information
When the chartplotter is connected to a compatible
Volvo Penta engine, you can view information about the
EVC network, such as features, components, software
versions, and calibration.
From the menu bar, select
My Vessel
>
Status
>
EVC
Network
.
Easy Connect Information
When the chartplotter is connected to a compatible Volvo
Penta engine and the installation includes a Volvo Penta
Easy Connect Interface, you can view information about
the Easy Connect Interface, such as the Bluetooth code.
From the menu bar, select
My Vessel
>
Status
>
Easy
Connect
.
inReach
®
Messages
WARNING
Do not read or reply to notifications while operating the
vessel. Failure to pay attention to the conditions on the
water can result in vessel damage, personal injury, or
death.
You can connect an inReach Mini device to the
chartplotter to view, reply to, and send preset messages
from the chartplotter.
NOTE:
The inReach Mini device must be connected to
the chartplotter and receiving satellite signals to send and
receive messages using the chartplotter.
To open the InReach® page, select
Vessel
>
InReach®
.
Connecting an inReach Device to the
Chartplotter
You can connect a compatible inReach device to the
chartplotter to manage messages.
1
Bring the inReach device within 3 m (10 ft.) of the
chartplotter.
2
From the main menu of the inReach device, select
Setup
>
ANT+
>
Status
>
On
.
3
On the chartplotter, select
Vessel
>
InReach®
>
Start
Pairing
.
The chartplotter begins searching for and connecting to
the inReach device. This can take up to 60 seconds.
4
If necessary, compare the code on the inReach device
to the chartplotter, and select
OK
if they match.
The inReach and chartplotter connect automatically when
they are within range.
Receiving inReach Messages
When your inReach device receives a message, a pop-
up notification appears briefly on the GLASS COCKPIT
screen.
• To review the full message, select
Review
.
• To dismiss the pop-up notification, select
OK
or wait for
the notification to close automatically.
Sending an inReach Preset Message
Preset messages are messages that you created at
. Preset messages have predefined
text and recipients.
1
From the
InReach®
page, select
Messages
>
Send
inReach Preset
.
2
Select a preset message.
3
Select
Send
.
Replying to an inReach Message
You can reply to an inReach message with a pre-written
message.
1
From the
InReach®
page, select
Messages
.
A list of sent and received messages appears.
2
Select a received message.
3
Select
Reply
.
4
Select a message.
5
Select
Send
.
Vessel Information
65
Содержание GPSMAP 8X10
Страница 1: ...Owners manual VOLVO PENTA GLASS COCKPIT ...
Страница 109: ......
Страница 110: ...AB Volvo Penta SE 405 08 Göteborg Sweden March 2022 Printed in the UK 190 01977 10_0L ...
