background image

SideVü Sonar View

NOTE: 

Not all models provide built-in SideVü sonar support. If 

your model does not provide built-in SideVü sonar, you need a 

compatible sounder module and compatible SideVü transducer.
If your model does provide built-in SideVü sonar, you need a 

compatible SideVü transducer.
SideVü scanning sonar technology shows you a picture of what 

lies to the sides of the boat. You can use this as a search tool to 

find structures and fish.

Left side of the boat

Right side of the boat

The transducer on your vessel

Trees

Old tires

Logs

Distance from the side of the boat

Water between the vessel and the bottom

SideVü Scanning Technology

Instead of a more common conical beam, the SideVü transducer 

uses a flat beam to scan the water and bottom to the sides of 

your boat.

Measuring Distance on the Sonar Screen

You can measure the distance between two points on the 

SideVü sonar view.

1

From the SideVü sonar view, select  .

2

Select a location on the screen.

3

Select 

Measure

.

A push pin appears on the screen at the selected location.

4

Select another location.
The distance and angle from the pin is listed in the upper-left 

corner.

TIP: 

To reset the pin and measure from the current location of 

the pin, select Set Reference.

Panoptix Sonar Views

To receive Panoptix sonar, you need a compatible transducer.
The Panoptix sonar views allow you to see all around the boat in 

real time. You can also watch your bait underwater and bait 

schools in front of or below your boat.
The LiveVü sonar views provide you a view of the live 

movement either in front of or below your boat. The screen 

updates very quickly, producing sonar views that look more like 

live video.
The RealVü 3D sonar views provide three-dimensional views of 

either what is in front of or below your boat. The screen updates 

with each sweep of the transducer.
To see all five Panoptix sonar views, you need one transducer 

to show the down views and a second transducer to show the 

forward views.
To access the Panoptix sonar views, select Sonar, and select a 

view.

LiveVü Down Sonar View

This sonar view shows a two-dimensional view of what is below 

the boat and can be used to see a bait ball and fish.

Panoptix down view history in a scrolling sonar view

Boat

Range

Trails

Drop shot rig

Bottom

LiveVü Forward Sonar View

This sonar view shows a two-dimensional view of what is in front 

of the boat and can be used to see a bait ball and fish.

Boat

Range

Fish

Trails

Bottom

26

Sonar Fishfinder

Содержание GPSMAP 8400 series



















































































Отзывы: