GPSMAP 640 Owner’s Manual
Marine Mode: Getting Started
Marine Mode: Getting Started
Step 1: Mount Your GPSMAP 640
1. Install the marine mount in your boat according to the
GPSMAP 60/640 Marne Mount Installaton Instructons
.
2. Place the GPSMAP 640 in the mounting bracket (see
.
Step 2:
Configure Your GPSMAP 640
To power on your GPSMAP 640 if it does not power on
automatically, press and hold the
Power
key until the Garmin
logo appears on the screen. Follow the on-screen prompts to set up
the marine mode on the device for the first time. To power off your
GPSMAP 640, press and hold the
Power
key.
Step 3: Acquire Satellites
1. Go outdoors to an open area, away from tall buildings and
trees.
2. Turn on your GPSMAP 640.
Acquiring satellite signals can take a few minutes. The bars
indicate satellite strength. When at least one of the bars is green,
your GPSMAP 640 has acquired satellite signals. Now you can
select a destination and navigate to it.
Step 4: Use Your GPSMAP 640
➊
➋ ➌➍ ➎
➏
Marine Mode: Home Screen
➊
Usage mode. A boat icon represents marine mode, and a car
icon represents automotive mode. Touch this icon to change
modes.
➋
XM
®
satellite strength (only available on the GPSMAP 640
when using an optional GXM 40 XM antenna).
➌
GPS satellite strength.
➍
Battery status.
➎
Current time.
➏
Home screen categories and actions. Touch an icon to view the
associated menu or perform the associated action.
Содержание GPSMAP 640
Страница 1: ...GPSMAP 640 owner s manual ...
Страница 93: ......
Страница 94: ......
Страница 95: ......