Viewing Information
GPSMAP 400/500 Series Owner’s Manual
39
3. Complete one of the following:
• Select
Merge from Card
to transfer data from the SD card to the
chartplotter and combine it with existing user data.
• Select
Replace from Card
to overwrite items on your chartplotter.
4. Select the file name from the list. The data is transferred from the SD card
to the chartplotter.
To copy the built-in maps to an SD card:
1. Insert an SD card (at least 4 GB) into the SD card slot on the front of the
unit.
2. From the Home screen, select
information
>
User data
>
data Transfer
>
Copy built-in Map
to copy the maps loaded onto your chartplotter to
the SD card.
To transfer data to or from a nMEA 2000 network:
1. Connect the unit to a NMEA 2000 network. Refer to the
GPSMAP 400/500
Installation Instructions
.
Only the following units are NMEA 2000 compatible:
• GPSMAP 441/441s
• GPSMAP 536/536s
• GPSMAP 541/541s
• GPSMAP 546/546s
2. From the Home screen, select
information
>
User data
>
data Transfer
>
Network
.
3. Complete one of the following:
• Select
Clone User data
to transfer waypoints, routes, and tracks
to other chartplotters connected to the network. Existing data is
overwritten on those chartplotters.
• Select
Merge User data
to transfer data between all the chartplotters
connected to the network. Unique data is combined with existing data
on every chartplotter.
To back up data to a computer:
1. Insert an SD card into the SD card slot on the front of the unit.
2. From the Home screen, select
information
>
User data
>
data Transfer
>
Save To Card
.
3. Complete one of the following:
• Select the file name from the list.
• Select
add New file
to create a new file. Enter the file name using the
Rocker
, and press
SELECT
.
4. Remove the SD card from the unit, and insert it into an SD card reader
attached to a computer.
5. From Windows
®
Explorer, open the Garmin\UserData folder on the SD
card.
6. Copy the appropriate .ADM file on the card, and paste it to any location on
the computer.
