background image

Device Overview

GPSMAP 400/500 Series Owner’s Manual 

7

Understanding the Home Screen

Use the Home screen to access all other screens. Press 

HOME 

from any 

screen to return to the Home screen.
• 

Charts

—selects Navigation, Fishing, Perspective 3D, Mariner’s Eye 3D, 

Fish Eye 3D, and Split Navigation charts.

NOTE

: Mariner’s Eye 3D charts and Fish Eye 3D charts are available only 

if you use a BlueChart g2 Vision SD card. Fishing charts are available if 

you use a BlueChart g2 Vision SD card or if your built-in map supports 

Fishing charts.

• 

Sonar

—set up and access sonar information (

page 54

).

NOTE

: You must have an “s” series unit (such as a GPSMAP 441s) with a 

connected transducer to use sonar features.

• 

Chart/Sonar

—set up the screen to view a chart and sonar in a split screen 

(

page 21

).

• 

where To?

—access navigation features (

page 22

).

• 

information

—view information including dashboard options, tides, 

currents, celestial data, user data, information about other vessels, and 

weather (

page 30

). See the 

GPSMAP 400/500 Series Weather Supplement

 

for more information.

• 

Configure

—access unit and system settings (

page 46

).

Содержание GPSMAP 546















































































Отзывы: