Garmin GPSMAP 5215, Руководство по установке

Страница: 15 / 24

15 GPSMAP 4000/5000 Series Installation Instructions
Wiring Additional nMEA 0183 Devices
The NMEA 0183 data cable included with the GPSMAP 4000/5000 series chartplotter supports the NMEA 0183 standard, which is used to wire
various NMEA 0183-compliant devices, such as VHF radios, NMEA instruments, autopilots, or a computer.
Basic nMEA 0183 Wiring
These diagrams illustrate basic NMEA 0183 wiring used to connect your GPSMAP 4000/5000 series chartplotter to NMEA 0183-compliant
devices such as an AIS or DSC device. For more-complete information on the NMEA 0183 capabilities of the GPSMAP 4000/5000 series
chartplotter, see the section on advanced NMEA 0183 wiring ( page 16 ).
Wiring to a nMEA 0183-compliant Device (AIS)
+
-
>
>
>
>
>
>
>
>
PInk rECEIVE B(-)
Garmin
GPSMAP 4000/5000 series
chartplotter
NMEA 0183-compliant
device
(AIS)
BAttErY
10–35 Vdc
WIrE CoLor WIrE
rED (PoWEr)
BLACk (PWr GnD)
rED (PoWEr)
FuSE
7.5 A - 42 V
BLACk (DAtA GnD)
WHItE
orAnGE/WHItE
GrAY
trAnSMIt A(+)
trAnSMIt B(-)
rECEIVE A(+)
BLACk (PWr GnD)
BLACk (DAtA GnD)
PoWEr
CABLE
nMEA 0183
CABLE
Wiring to a Single-ended nMEA 0183-compliant Device
+
-
>
>
>
>
>
>
Garmin
GPSMAP 4000/5000 series
chartplotter
NMEA 0183-compliant
device
BAttErY
10–35 Vdc
WIrE CoLor WIrE
rED (PoWEr)
BLACk (PWr GnD)
rED (PoWEr)
FuSE
7.5 A - 42 V
BLACk (DAtA GnD)
WHItE
orAnGE/WHItE
GrAY
PInk
BLACk (PWr GnD)
BLACk (DAtA GnD)
PoWEr
CABLE
nMEA 0183
CABLE trAnSMIt
rECEIVE
unConnECtED
notes:
• If the NMEA 0183-compliant device has only one receiving wire (no A, B, +, or -), leave the
pink
wire unconnected.
• If the NMEA 0183-compliant device has only one transmitting wire (no A, B, +, or -), connect the orange/white wire to ground.
• Consult the installation instructions of your NMEA 0183-compliant device to identify the Transmit A(+) and B(-) wires and Receive A(+)
and B(-) wires.
• Use 28 AWG, shielded, twisted-pair wiring for extended runs of wire.
• Solder all connections and seal them with heat-shrink tubing.