Garmin GPSMAP 392, 398, 492, 498 Скачать руководство пользователя страница 80

Страница: 80 / 122

GPSMAP 392/398/492/498 Owner’s Manual

SING

ONAR

AGE

SING

ONAR

This section covers the additional sonar options for the

GPSMAP 398/498 when used with a transducer and the

GPSMAP 392/492 when used with a GSD 22, GSD 21, GSD 20

and tranducer. Read the

Installation Instructions

to properly install

the GSD 22, GSD 21, or GSD 20 and transducer.

NOTE:

You

MUST

have a transducer installed and connected

to your GPSMAP 398/498 to use the sonar features.

NOTE:

You

MUST

have a GSD 22, GSD 21, or GSD 20 and a

transducer installed and connected to your GPSMAP 392/492 to

use the sonar features. Ultrascroll is not available with the GSD 20.

Understanding Sonar

The transducer mounted on your vessel sends sound waves

down into the water in a cone shape, similar to a ﬂashlight beam

(covering a smaller circular area at the top and angling out to a

larger circular area at the bottom). These sound waves reﬂect off

of any object that they hit, and then the waves travel back up to the

transducer. These objects could be ﬁsh, branches, the bottom, or

any other object that has a density that is different from the water.

The transducer receives the sound wave information and then sends

the information to the GSD 22, GSD 21, GSD 20 sounder module

and then to the GPSMAP 392/398/492/498. The

GPSMAP 392/398/492/498 displays the information on the screen

for you to see and interpret. The type of transducer and the settings

that you choose determine how the information is displayed on the

screen.

Using Dual Frequency

Dual frequency works best for deep water (off-shore) applications.

The 200 kHz frequency allows you access to great detail about

what is underneath your boat. The 50 kHz frequency provides

less detailed information, but penetrates to greater depths with

the same power. You can choose either or both frequencies to get

the information that you want. If you choose dual frequency, the

transducer alternates between the 50 kHz and 200 kHz signals. This

capability allows you to see the best picture available at any depth.

Using Dual Beam

Dual beam works best for shallow water (for example, inland)

applications. A dual beam transducer can transmit a narrow or a

wide beam. The water area covered by the transmitted sound waves

is determined by the beam width of the transducer and the water

depth. The narrow beam provides crisp detail of what is under your

boat, and is very helpful if you are ﬁshing in deeper water where

the beam covers more area (for example, at a 30-foot depth, the

narrow beam covers the area of about a 7-foot circle).

Содержание GPSMAP 392, 398, 492, 498



























































































































Результаты поиска

Содержание GPSMAP 392, 398, 492, 498

Отзывы:

Похожие инструкции для GPSMAP 392, 398, 492, 498

Бренды по названию

Популярные бренды

Garmin GPSMAP 392, 398, 492, 498, Руководство пользователя

Результаты поиска

Содержание GPSMAP 392, 398, 492, 498

Отзывы:

Похожие инструкции для GPSMAP 392, 398, 492, 498

Бренды по названию

Популярные бренды