Garmin GPSMAP 392, 398, 492, 498 Скачать руководство пользователя страница 99

Страница: 99 / 122

GPSMAP 392/398/492/498 Owner’s Manual

PPENDIX

NSTALLING

THE

RANSDUCER

Transom Mount Transducer

The following diagram is for mounting the transducer included with the GPSMAP 392/398/492/498 with transducer package. If the

transducer lead is too short, extension cables are available from your Garmin dealer. DO NOT cut the transducer lead or any part of the

transducer cable, as this will void your warranty. The cable cannot be spliced and connected to any existing (Garmin or non-Garmin)

transducer cables.

NOTE:

DO NOT mount the transducer behind strakes, struts, ﬁttings, water intake, or discharge ports, or anything that creates air bubbles or

causes the water to become turbulent. It is important that the transducer is in clean (non-turbulent) water for optimal performance.

��

Mount the transducer cable cover

well above the waterline.

Transducer should extend 1/8" below the

ﬁberglass hull or 3/8" below aluminum hull.

Make sure that the transducer is below the water

level when the boat is on plane at high speed.

Do not mount the transducer directly in the path of the prop.

The transducer can cause cavitation that my degrade the boat’s

performance and damage the prop.

Apply marine sealant to all screw threads to

prevent water from seeping into the transom.

Mount the transducer parallel with the water surface.

Содержание GPSMAP 392, 398, 492, 498



























































































































Результаты поиска

Содержание GPSMAP 392, 398, 492, 498

Отзывы:

Похожие инструкции для GPSMAP 392, 398, 492, 498

Бренды по названию

Популярные бренды

Garmin GPSMAP 392, 398, 492, 498, Руководство пользователя

Результаты поиска

Содержание GPSMAP 392, 398, 492, 498

Отзывы:

Похожие инструкции для GPSMAP 392, 398, 492, 498

Бренды по названию

Популярные бренды