Garmin GPSMAP 3005C, Руководство пользователя, Страница: 26 / 112

18 GPSMAP 3005C Owner’s Manual
B
ASIC
O
PERATION
> R
EVIEWING AND
E
DITING
W
AYPOINTS
3. Use the ROCKER to highlight the symbol of the waypoints you want to
delete, and press ENTER .
4. Highlight OK , and press ENTER to delete the waypoints by symbol.
Otherwise, press the Cancel soft key to return to the User sub tab without
deleting any waypoints.
To delete all user waypoints:
1. On the User sub tab, press the Delete All soft key.
2. Highlight OK , and press ENTER to delete all user waypoints.
Proximity Waypoints
Use the Proximity sub tab to define an alarm circle around a stored waypoint. The
alarm circle can help you avoid reefs, rocks, or restricted waters. You can add
proximity alarms to a maximum of 10 waypoints or on-screen map items, with a
maximum alarm radius of 99.99 nautical or statute miles or kilometers.
Proximity
circle
Proximity
waypoint
If a proximity alarm circle overlaps an existing alarm circle, the message
“Proximity Overlaps Another Proximity Waypoint” appears. Because the unit
only alerts for one of the overlap points, use caution when navigating in these
areas. If you enter a red proximity circle overlap, you are alerted only to the
closest proximity waypoint.
To add a proximity waypoint:
1. Press the New Alarm soft key on the Proximity sub tab. The Find From
Current Position Page appears.
2. Highlight a category, and press ENTER .
3. Use the ROCKER to highlight a waypoint or map item from the list, and
press ENTER . The Review Page appears for the selected waypoint or
map item within a red circle.
4. Press the OK soft key. The Proximity sub tab appears with the Distance
highlighted.
5. Press ENTER and use the ROCKER to enter a proximity radius
(up to 99.99 units).
6. Press ENTER when finished.
To turn proximity alarms on or off:
1. Use the ROCKER to highlight the field below Proximity Alarm on the
Proximity sub tab , and press ENTER .
2. Select ON or OFF , and press ENTER .
To clear one or all proximity waypoints from the list:
1. Use the ROCKER to highlight the proximity waypoint you want to clear.
2. To clear a single alarm, press the Delete soft key.
OR
To clear all proximity waypoints, press the Delete All soft key. A
confirmation message appears.
3. Press the OK soft key to delete the proximity waypoint. Otherwise, press
the Cancel soft key, or press QUIT to cancel.