background image

Learning About the Keypad

IN/OUT Keys

•   Press to zoom in or out on the Map Page.

ROCKER Keypad

•   Press up, down, right or left to move through 

lists, highlight fields, on-screen buttons and icons, 

enter data, or move the map pointer.

NRST/FIND Key

•   Shows the nearest airports, navaids, points of 

communication, and airspace boundaries in 

Aviation Mode. 

•   Press multiple times in Aviation Mode to show 

the Find Menu.

DIRECT TO Key

•   Press to start a Go To using airports, navaids, 

recently used waypoints, or user-created 

waypoints.

•   Press and hold to show additional information for 

the current destination (such as communication 

frequency and runway data). 

•   While in Automotive Mode, press and hold for 

more than one second to show the Next Turn 

Page and announce the next turn.

PAGE Key

•   Press to cycle through the main pages in sequence 

and return the screen from a submenu page. 

•   Press and hold to switch between Aviation, 

Automotive, and Marine Modes.

QUIT Key

•   Press to cycle through the main pages in reverse 

sequence, revert to the previous value in a data entry 

field, or cancel a function.

ENTER/MARK Key

•   Press to select a highlighted option, initiate entry, 

and then confirm. 

•   Press and hold to mark a waypoint.

MENU Key

•   Press to view the Options Menu for the current page. 
•   Press twice to show the Main Menu. 

POWER Key

•   Press and hold to turn the unit on or off. 
•   Press and release to adjust the backlighting and 

external speaker volume.

GPSMAP 296 Pilot’s Guide 

7

G

ETTING

 S

TARTED

 > 

L

EARNING

 

ABOUT

 

THE

 K

EYPAD

Содержание GPSMAP 296 - Aviation GPS Receiver









































































































































































Отзывы: