Garmin GPSMAP 2106 - Marine GPS Receiver Скачать руководство пользователя

Страница: 59 / 106

GPSMAP 2106/2110 Owner’s Manual

AIN

ENU

RACKS

The following settings are available:

• Record Mode

—allows you to select one of three track recording options:

•

Off

—No track log is recorded. If you select

Off

, you cannot use the

TracBack feature.

•

Fill

—a track log is recorded until the track memory is full.

•

Wrap

—a track log is continuously recorded, wrapping through the

available memory (replacing the oldest track data with new data).

•

Color

—allows you to specify a color used to show the active track log on

the Map and Highway Pages.

• Interval

—deﬁnes the frequency at which the track plot is recorded. Three

interval settings are available:

•

Distance

—records the track based on a user-deﬁned distance between

points.

•

Time

—records track plot based on a user-deﬁned time interval.

•

Resolution

—records the track plot based on a user-deﬁned variance

from your course over ground or changes in water depth/temp

(if equipped). The Resolution option is the default setting and is

recommended for the most efﬁcient use of memory and TracBack

performance. The distance value (entered in the value ﬁeld) is the

maximum error allowed from the true course before recording a track

point.

•

Value

—deﬁnes the distance or time used to record the track log.

The following soft keys are available:

•

Save

—saves the current active track log.

•

Clear

—clears the active track log currently stored in memory.

Saved Sub Tab

The

Saved

sub tab shows a list of all saved track logs. It also allows you to use

a track for TracBack or display it on a map. You can save up to 15 track logs in

memory with up to 700 track log points in each saved log.
On the Saved sub tab, the following soft keys are available:

•

Review Map

—opens the Saved Track window so you can review the

selected track.

•

Delete

—deletes the highlighted saved track log from memory.

•

Delete All

—deletes all saved track logs from memory.

Содержание GPSMAP 2106 - Marine GPS Receiver











































































































Результаты поиска

Содержание GPSMAP 2106 - Marine GPS Receiver

Отзывы:

Похожие инструкции для GPSMAP 2106 - Marine GPS Receiver

Бренды по названию

Популярные бренды

Garmin GPSMAP 2106 - Marine GPS Receiver, Руководство пользователя

Результаты поиска

Содержание GPSMAP 2106 - Marine GPS Receiver

Отзывы:

Похожие инструкции для GPSMAP 2106 - Marine GPS Receiver

Бренды по названию

Популярные бренды