Garmin GPSMAP 2106 - Marine GPS Receiver Скачать руководство пользователя

Страница: 25 / 106

GPSMAP 2106/2110 Owner’s Manual

ASIC

PERATION

EVIEWING

AND

DITING

AYPOINTS

Using Waypoint Lists

The Points tab on the Main Menu has two sub tabs,

User

and

Proximity

, which

allows you to manage a large number of waypoints quickly and efﬁciently. The

Proximity sub tab also provides a continuously updated proximity waypoint alarm

that you can use to deﬁne an alarm circle around submerged hazards or shallow

waters.

To access the Points tab from the Main Menu:

1. Press and hold

ADJ/MENU

to open the Main Menu.

2. Use the

ROCKER

to highlight the

Points

tab, and highlight either the

User

Proximity

sub tab.

Sub tabs

User Waypoints

The User sub tab on the Points tab shows a master list of all waypoints currently

stored in memory. From the User sub tab, you can review, edit, rename, or delete

individual waypoints, or delete all user waypoints. The number of available and

used waypoints are shown at the bottom of the User sub tab. Stored waypoints are

arranged in alphanumeric order.

To scroll through and review the waypoint list:

1. Use the

ROCKER

to highlight the

Points

tab on the Main Menu, and then

highlight the

User

sub tab.

2. Press up or down on the

ROCKER

to scroll through the list of waypoints;

press right or left on the

ROCKER

to scroll by page.

3. Press

ENTER

to review the highlighted waypoint on the Review Waypoint

Page. See page

for information on reviewing and editing waypoints.

4. Press the

Next

soft key to return to the waypoint list. The next waypoint in

the list is automatically highlighted.

Deleting Waypoints

The following soft keys are available when you highlight a waypoint on the User

sub tab:

•

New Waypoint

—creates a new waypoint.

•

Delete

—deletes the selected waypoint from the list and from any route in

which the waypoint was used.

•

Del by Smbl

—deletes waypoints that use the same symbol.

•

Delete All

—deletes all waypoints from the unit.

NOTE:

When you delete a waypoint from the list, it cannot be recovered from

the unit. Save important waypoints to a data card, or write them down.

Содержание GPSMAP 2106 - Marine GPS Receiver











































































































Результаты поиска

Содержание GPSMAP 2106 - Marine GPS Receiver

Отзывы:

Похожие инструкции для GPSMAP 2106 - Marine GPS Receiver

Бренды по названию

Популярные бренды

Garmin GPSMAP 2106 - Marine GPS Receiver, Руководство пользователя

Результаты поиска

Содержание GPSMAP 2106 - Marine GPS Receiver

Отзывы:

Похожие инструкции для GPSMAP 2106 - Marine GPS Receiver

Бренды по названию

Популярные бренды