Garmin GPSMAP 2106 - Marine GPS Receiver, Руководство пользователя

Страница: 21 / 106

GPSMAP 2106/2110 Owner’s Manual 13
B
ASIC
O
PERATION
> C
REATING AND
U
SING
W
AYPOINTS
Creating and Using Waypoints
The GPSMAP 2106/2110 stores up to 4,000 alphanumeric waypoints, each with a
user-defined icon, comment, depth, and water temperature.
NOTE: If you are using a Garmin GSD 21 or GSD 22 sounder module, the
Depth and W ater Temp fields fill in automatically.
You can create waypoints using three basic methods:
• ENTER/MARK —use the ENTER/MARK key to quickly mark your
current location.
• Graphically —use the map display to define a new waypoint location.
• Manually —enter new waypoint coordinates manually.
Creating Waypoints Using the ENTER/MARK Key
Use the
ENTER/MARK
key to capture your current location (or pointer or map
item location) to create a new waypoint. You must have a valid position fix to
mark your current location.
To mark your current location:
1. Press and hold ENTER/MARK until the Review Waypoint Page appears.
The GPSMAP 2106/2110 captures its current location and creates a
default name and symbol for the new waypoint.
2. To accept the waypoint with the default name and symbol, press ENTER .
To change any of the available waypoint information, see page 16 .
Review Waypoint Page (BlueChart Data Shown)
Creating Waypoints Using the Map
You can create a waypoint by using the map pointer to point to any map
location or map feature. When you move the pointer over a map item, you see a
highlighted description of the item.
To create a new waypoint using a map location:
1. Use the ROCKER to move the pointer to the map location you want.
2. Press and quickly release ENTER/MARK to capture the pointer location.
Do not hold the button down; doing so marks your current location, not the
map location. The Review Waypoint Page appears.
3. To accept the waypoint with the default information, press ENTER .
OR
To change any waypoint information, highlight the appropriate field and
press ENTER . After entering your changes, press the OK soft key.