0
GPSMAP 76Cx Owner’s Manual
M
aIn
p
aGeS
Compass Page Options
Stop (Resume) Navigation
—turns active
navigation for a route or Go To on and off.
Recalculate
—recalculates the path to a
destination.
Course or Bearing Pointer
—toggles between
the course pointer and the bearing pointer.
Data Fields
—selects the number of data fields
that appear on the Compass page.
Change Data Fields
—selects the type of data
you want to show in the data fields.
Restore Defaults
—returns to factory settings.
•
•
•
•
•
•
Using the Course Pointer or Bearing
Pointer
The bearing pointer and course pointer are
independent of each other. The bearing pointer
indicates the direction to your destination, and the
course pointer indicates your relationship to a course
line leading to the destination.
If the bearing pointer arrow is pointing straight
up, for example, you are going directly to your
destination. If it points any direction other than up,
turn toward that direction until the arrow is pointing
up and then continue in that direction. The bearing
pointer points to the destination.
The Bearng Ponter always ndcates the drecton
to your destnaton from your current locaton.