manualshive.com logo in svg

Garmin GPSMAP 12X3, Руководство пользователя, Страница: 163 / 212

Поделиться
Скачать
Garmin GPSMAP 12X3 Скачать руководство пользователя страница 163

Clearing All Locked Channels on a SiriusXM Radio

Before you can clear all locked channels, the parental controls must be unlocked.
1 From the media screen, select Browse > Parental > Clear All Locked.
2 Enter your passcode.

Restoring Default Parental Control Settings Values

This process deletes all the settings information you have entered. When you restore the parental control 
settings to their default values, the passcode value is reset to 0000.
1 From the media menu, select Installation > Factory Defaults.
2 Select Yes.

Changing a Parental Passcode on a SiriusXM Radio

Before you can change the passcode, the parental controls must be unlocked.
1 From the media screen, select Browse > Parental > Change PIN.
2 Enter your passcode and select Done.
3 Enter a new passcode.
4 Confirm the new passcode.

Setting the Device Name

1 From the media screen, select Options > Installation > Set Device Name.
2 Enter a device name.
3 Select Select or Done.

Updating the Media Player Software

You can update the software on compatible connected stereos and accessories.

See the stereo Owner's Manual at 

support.garmin.com

 for instructions on updating the software.

Configuring a Stereo from the Chartplotter

You can configure various features of a compatible connected stereo using the chartplotter.
1 From the Media screen, select Options > Installation.
2 Select the name of the stereo.
3 Select a setting to configure.

NOTE: See the latest Owner's Manual for the stereo for more information about the settings you can 
configure.

SiriusXM Weather

 WARNING

The weather information provided through this product is subject to service interruptions and may contain 
errors, inaccuracies, or outdated information, and consequently should not be relied upon exclusively. Always 

use common sense while navigating, and check alternate weather information sources prior to making safety-
related decisions. You acknowledge and agree that you shall be solely responsible for use of the weather 
information and all decisions taken with respect to navigating in weather. Garmin will not be responsible for any 
consequences of using SiriusXM weather information.

NOTE: SiriusXM data is not available in all regions.
A Garmin SiriusXM satellite weather receiver and antenna receives satellite weather data and shows it on 
various Garmin devices, including the Navigation chart on a compatible chartplotter. The weather data for 
each feature comes from reputable weather data centers such as the National Weather Service and the 
Hydrometeorological Prediction Center. For more information, go to 

www.siriusxm.com/sxmmarine

.

Configuring a Stereo from the Chartplotter

149

Содержание GPSMAP 12X3





















































































































































































































Отзывы:

Нет отзывов