Garmin GPS 400 Скачать руководство пользователя

Страница: 154 / 238

GPS 400 Pilot’s Guide and Reference

190-00140-60 Rev. E

8-18

SECTION 8

AUX PAGES

3) The ﬂashing cursor moves to the arrival date

ﬁeld. Use the small and large

right

knobs to

enter the date for which the pilot wants to
determine RAIM availability. Press the

ENT

Key when ﬁnished.

4) The ﬂashing cursor moves to the arrival time

ﬁeld. Use the small and large

right

knobs to

enter the time for which the pilot wants to
determine RAIM availability. Press the

ENT

Key when ﬁnished.

5) The flashing cursor moves to ‘Compute

RAIM?’ (Figure 8-44). Press the

ENT

Key to

begin RAIM prediction. Once calculations are
complete, the GPS 400 displays one of the
following in the RAIM status ﬁeld:

•

RAIM Not Available - Satellite coverage is
predicted to NOT be sufﬁcient for reliable
operation during non-precision approaches

•

RAIM Available - Satellite coverage is predicted
to be sufﬁcient for reliable operation during
all flight phases, including non-precision
approaches

Figure 8-44 ‘Compute RAIM?’ Highlighted

NOTE: RAIM computations predict satellite
coverage within

15 minutes of the speciﬁed

arrival date and time. Refer to Section 8.3 for
speciﬁc information regarding RAIM protection
limits, also refer to Section 11 for FDE (Fault
Detection and Exclusion) information.

Utility Page: Sunrise/Sunset

Calculating sunrise and sunset times at any
waypoint or the present position:

1) Select ‘Sunrise/Sunset’ from the Utility Page,

using the steps described at the beginning of
this section (Figure 8-45).

Figure 8-45 Sunrise Sunset Highlighted

2) The ﬂashing cursor highlights the waypoint

ﬁeld. Use the small and large

right

knobs to

enter the identiﬁer of the waypoint at which
the pilot wants to determine sunrise and sunset
times. Press the

ENT

Key when ﬁnished. To

determine sunrise/sunset times for the present
position, press the

CLR

Key, followed by the

ENT

Key.

3) The ﬂashing cursor moves to the date ﬁeld

(Figure 8-46). Use the small and large

right

knobs to enter the date for which the pilot
wants to determine sunrise and sunset times.

Figure 8-46 Date Field Highlighted

Содержание GPS 400















































































































































































































































Результаты поиска

Содержание GPS 400

Отзывы:

Похожие инструкции для GPS 400

Бренды по названию

Популярные бренды

Garmin GPS 400, Руководство и справочник пилота

Результаты поиска

Содержание GPS 400

Отзывы:

Похожие инструкции для GPS 400

Бренды по названию

Популярные бренды