Garmin GNS 400W Скачать руководство пользователя страница 74

Страница: 74 / 220

3 - DIRECT-TO

190-00356-00 Rev G

Shortcuts

Shortcuts are available when using the

direct-to

key, allowing you to bypass the use of the

small

and

large right

knobs to enter the waypoint’s identifier. A

direct-to can be performed from any page displaying
a single waypoint identifier (such as the WPT pages
for airports and navaids) by simply pressing

direct-to

and

ENT

. For pages that display a list of waypoints

(e.g., the

nearest airport page)

, you must highlight the

desired waypoint with the cursor before pressing the

direct-to

key.

To select an on-screen waypoint (other than the
map page) as a direct-to waypoint:

1. If a single airport, navaid or user waypoint is

displayed on-screen: press

direct-to

, then

press

ENT

twice.

2. If a list of waypoints is displayed on-screen:

press the

small right

knob to activate the

cursor, turn the

large right

knob to highlight

the desired waypoint, then press

direct-to

followed by

ENT

twice.

Direct-to waypoints may also be selected from

the

map page

, by panning to the desired location

and pressing

direct-to

and

ENT

(twice). If no air-

port, navaid or user waypoint exists at the desired
location, a waypoint named “+MAP” will auto-
matically be created at the location of the panning
pointer.

To select a direct-to waypoint from the map page:

1. From the map page, press the

small right

knob to display a panning pointer.

2. Turn the

small

and

large

right

knobs to place

the panning pointer at the desired location.

3. If the panning pointer is placed on an existing

airport, navaid or user waypoint, the waypoint
name will be highlighted. Press

direct-to

and

then

ENT

twice to navigate to the waypoint.

4. If the panning pointer is placed on an open

location, press

direct-to

and

ENT

twice to

create a “+MAP” waypoint and navigate to
it.

Direct-to Shortcuts

Содержание GNS 400W





























































































































































































































Результаты поиска

Содержание GNS 400W

Отзывы:

Похожие инструкции для GNS 400W

Бренды по названию

Популярные бренды

Garmin GNS 400W, Руководство и справочник пилота

Результаты поиска

Содержание GNS 400W

Отзывы:

Похожие инструкции для GNS 400W

Бренды по названию

Популярные бренды