Garmin GNC 420 страница 166 Скачать руководство пользователя

Страница: 166 / 258

GNC 420(A) Pilot’s Guide and Reference

9-18

SECTION 9

AUX PAGES

3) The flashing cursor moves to the arrival date

field. Use the small and large

right

knobs to

enter the date for which the pilot wants to
determine RAIM availability. Press the

ENT

Key when finished.

4) The flashing cursor moves to the arrival time

field. Use the small and large

right

knobs to

enter the time for which the pilot wants to
determine RAIM availability. Press the

ENT

Key when finished.

5) The flashing cursor moves to ‘Compute

RAIM?’ (Figure 9-44). Press the

ENT

Key to

begin RAIM prediction. Once calculations are
complete, the GNC 420 displays one of the
following in the RAIM status field:

•

RAIM Not Available - Satellite coverage is

predicted to NOT be sufficient for reliable
operation during non-precision approaches

•

RAIM Available - Satellite coverage is predicted

to be sufficient for reliable operation during
all flight phases, including non-precision
approaches

Figure 9-44 ‘Compute RAIM?’ Highlighted

NOTe: raiM computations predict satellite
coverage within

15 minutes of the specified

arrival date and time. refer to Section 9.4 for
specific information regarding raiM protection
limits, also refer to Section 12 for FDe (Fault
Detection and exclusion) information.

Utility Page: Sunrise/Sunset

Calculating sunrise and sunset times at any
waypoint or the present position:

1) Select ‘Sunrise/Sunset’ from the Utility Page,

using the steps described at the beginning of
this section (Figure 9-45).

Figure 9-45 Sunrise Sunset Highlighted

2) The flashing cursor highlights the waypoint

field. Use the small and large

right

knobs to

enter the identifier of the waypoint at which
the pilot wants to determine sunrise and sunset
times. Press the

ENT

Key when finished. To

determine sunrise/sunset times for the present
position, press the

CLR

Key, followed by the

ENT

Key.

3) The flashing cursor moves to the date field

(Figure 9-46). Use the small and large

right

knobs to enter the date for which the pilot
wants to determine sunrise and sunset times.

Figure 9-46 Date Field Highlighted

190-00140-20 Rev. K

Содержание GNC 420



































































































































































































































































Результаты поиска

Содержание GNC 420

Отзывы:

Похожие инструкции для GNC 420

Бренды по названию

Популярные бренды

Garmin GNC 420, Руководство и справочник пилота

Результаты поиска

Содержание GNC 420

Отзывы:

Похожие инструкции для GNC 420

Бренды по названию

Популярные бренды