Garmin GNC 420 страница 124 Скачать руководство пользователя

Страница: 124 / 258

GNC 420(A) Pilot’s Guide and Reference

7-14

SECTION 7

WPT PAGES

Airport Departure Page Options

The following option is available for the Airport

Departure Page, by pressing the

Key:

Load into Active FPL? allows the pilot to load the

selected departure into the active flight plan. This is

identical to loading a departure procedure from the

Procedures Page, as described in Section 6.1.

Loading a departure procedure from the
Airport Departure Page:

1) Select the desired departure, runway, and

transition using the steps above.

2) Press the

MENU

Key to display the Airport

Departure Page Menu.

3) Press the

ENT

Key to select the ‘Load into

Active FPL?’ option (Figure 7-30).

Figure 7-30 Airport Departure Page Menu

4) The Active Flight Plan Page appears. Press

the

FPL

Key to return to the Airport Departure

Page.

7.8 INTERSECTION PAGE

The

Intersection Page (Figure 7-31) displays the

latitude, longitude, region, and country for the selected

intersection. The Intersection Page also displays the
identifier, radial, and distance from the nearest VOR,
VORTAC, or VOR/DME.

Figure 7-31 Intersection Page

Intersection Identifier

and Symbol

Region/

Country

Nearest VOR

and Symbol

Radial and

Distance

from Nearest

VOR

Latitude/Longitude

Position

Number of Pages in

Current Page Group

Position of

Current Page

within Current

Page Group

Current Page Group

The following descriptions and abbreviations are

used:

• Position - Latitude/Longitude (degrees/minutes or

degrees/minutes/seconds), MGRS, or UTM/UPS

• RAD - Radial from nearest VOR in degrees

magnetic or degrees true (depending upon unit
configuration)

• DIS - Distance from nearest VOR, in nautical

miles/statute miles/kilometers (depending upon
unit configuration)

NOTe: The VOr displayed on the intersection
Page is the nearest VOr, not necessarily the VOr
used to define the intersection.

Intersections may only be selected by identifier, as

described in Section 7.1.

190-00140-20 Rev. K

Содержание GNC 420



































































































































































































































































Результаты поиска

Содержание GNC 420

Отзывы:

Похожие инструкции для GNC 420

Бренды по названию

Популярные бренды

Garmin GNC 420, Руководство и справочник пилота

Результаты поиска

Содержание GNC 420

Отзывы:

Похожие инструкции для GNC 420

Бренды по названию

Популярные бренды