Garmin GNC 420 Скачать руководство пользователя страница 114

Страница: 114 / 258

GNC 420(A) Pilot’s Guide and Reference

7-4

SECTION 7

WPT PAGES

7.2 AIRPORT LOCATION PAGE

The

Airport Location Page (Figure 7-8) displays the

latitude, longitude, and elevation of the selected airport.
The

Airport Location Page also displays facility name and

location, as well as fuel availability, available approaches,
radar coverage, and airspace type.

Position (Latitude/Longitude)

Facility Name and Location (City)

Radar Coverage

Airport Identifier, Symbol, and Type

Field Elevation and Available Fuels

Airspace Type

Best Available Approach

Current Page Group

Position of Current Page within Current
Page Group

Number of Pages in Current Page Group

Figure 7-8 Airport Location Page

The following descriptions and abbreviations are

used:

• Type - Usage type: Public, Heliport, Military, or

Private

• Position - Latitude/Longitude (degrees/minutes or

degrees/minutes/seconds), MGRS, or UTM/UPS

• Elevation - In feet or meters
• Fuel - For public-use airports, the available fuel

type(s) are: Avgas (80-87/100LL/100-130/Mogas),

Jet, or None

• Approach - Best available approach: ILS, MLS,

LOC, LDA, SDF, GPS, VOR, RNAV (‘RNV’),
LORAN (‘LOR’), NDB, TACAN (‘TCN’),
Helicopter (‘HEL’), or VFR

• Radar - Radar coverage: Yes or No
• Airspace - Control environment: Class B, Class C,

Class D, CTA, TMA, TRSA, or none

190-00140-20 Rev. K

Содержание GNC 420



































































































































































































































































Результаты поиска

Содержание GNC 420

Отзывы:

Garmin GNC 420, Руководство и справочник пилота, Страница: 114 / 258

Результаты поиска

Содержание GNC 420

Отзывы: