manualshive.com logo in svg

Garmin GMX 200, Руководство и справочник пилота

Поделиться
Скачать
Garmin GMX 200 Скачать руководство пользователя страница 76

6

190-00607-02 Rev C

Detailed Operation

GDL 69/69A - FIS

XM FIS Forecast Menu Item Page 1

1.   Press the 

FN

 key and then the 

FIS

 functon key 

when dsplayed. 

2.   Press the fourth functon smart key on the rght 

to select the Forecast (

Fcst

) sub-functon. 

.   The 

MENU/ENT

 key brngs up menu tems for 

more sub-functons. Of the followng sub-func-
tons, only four may be selected at any gven 
tme:    Sfc  On  or  Sfc Anmate,  Cty,  SIGMET, 
AIRMET, Frz Lvls, County, or Cyclone. 

 

NOTE:

 Forecasts are intended to provide data on 

expected conditions. Actual conditions may devi-
ate from the forecast. It is the pilot’s responsibil-
ity to obtain current information from official 
sources and to update this information during the 
flight. 

Surface Analysis

When enabled, the Surface Analysis forecast shows 

frontal lines indicating weather fronts and the direc-
tion they are moving. High and Low pressure centers 
are noted with a large H or L. Forecasts are available 
for intervals of current, 12, 24, 36, and 48 hours. 
The Forecast Time menu item will step through the 
intervals manually. The Surface Animate selection will 
automatically step through the times to provide an 
indication of how the weather systems are expected 
to move. Animating Surface Analysis products will 
disable the depiction of other enabled products. The 
product time for the other enabled products will be 
displayed as “N/A” while animation is active. 

A Cold Front is a front where cold air replaces 

warm air. A blue line with blue triangles that point in 
the direction of the cold air flow. 

A Warm Front is where warm air replaces cold air. 

An orange line with orange half moons that point in 
the direction of the warm air flow. 

A Stationary Front is a front with very little hori-

zontal movement. The line alternates with orange and 
blue sections which point in opposite directions to 
symbolize little movement. 

A Occluded Front is where a cold front has 

overtaken and merged with a warm front. The line 
alternates with the blue triangle and orange half moon 
symbols on the same side of the line pointing in the 
direction the front is moving. 

Содержание GMX 200





















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды