GHS
™
11
INSTALLATION INSTRUCTIONS
Important Safety Information
WARNING
See the Important Safety and Product Information guide in the product box for product warnings and other
important information.
CAUTION
To avoid possible personal injury, always wear safety goggles, ear protection, and a dust mask when drilling,
cutting, or sanding.
NOTICE
When drilling or cutting, always check what is on the opposite side of the surface to avoid damaging the vessel.
Tools Needed
• Pencil
• Drill
• 22 mm (
7
/
8
in.) drill bit or hole saw
• 3 mm (
1
/
8
in.) drill bit
• 4.76 mm (
3
/
16
in.) wrench
• Phillips screwdriver
• Marine sealant (optional)
GUID-12CE8CB8-5444-4BC0-B8B2-CE732B5A84CA v2
February 2022
