manualshive.com logo in svg

Garmin G950, Руководство пилота

Black & Decker G950 - мощный инструмент для домашних задач. Загрузите бесплатное руководство по эксплуатации с сайта manualshive.com для инструкций по использованию. Не упустите возможность получить подробное руководство на русском языке.

Поделиться
Скачать
background image

Garmin G950 Pilot’s Guide for the Pilatus PC-6

190-00870-02  Rev. A

290

HAZARD AVOIDANCE

SY

STEM

O

VER

VIEW

FLIGHT

INSTRUMENTS

EIS

AUDIO P

ANEL

& CNS

FLIGHT

MANA

GEMENT

HAZARD

AV

OID

ANCE

AFCS

ADDITIONAL FEA

TURES

APPENDICES

INDEX

6.1  AIRBORNE COLOR WEATHER RADAR

SYSTEM DESCRIPTION

The optional Garmin GWX 68 Airborne Color Weather Radar is a four-color digital pulsed radar with 6.5 

kilowatts of output power.   The optional Garmin GWX 70 Airborne Color Weather Radar is a solid-state pulsed 
radar with forty watts of output power.  The radar combines excellent range and adjustable scanning profiles 
with a high-definition target display.  The pulse width for the GWX 68 is four microseconds (µs) on all ranges 
except the 2.5 nm range.  The GWX 68 uses a one µs pulse width at this range to reduce the targets smearing 
together on the display for better target definition at close range.  The GWX 70 has an effective pulse length 
of 27.31 microseconds (µs), and the system optimizes the pulse length to maximize resolution at each range 
setting.

The Pilatus PC-6 uses a 10-inch phased array antenna that is fully stabilized to accommodate 30º of pitch 

and roll.

To focus radar scanning on specific areas, Sector Scanning offers pilot-adjustable horizontal scan angles of 

20º, 40º, 60º, or 90º.  A vertical scanning function helps to analyze storm tops, gradients, and cell buildup 
activity at various altitudes.

Radar features include:

• Extended Sensitivity Time Constant (STC) logic that automatically correlates distance of the return echo with 

intensity, so cells do not suddenly appear to get larger as they get closer.

• WATCH® (Weather ATtenuated Color Highlight) helps identify possible shadowing effects of short-range 

cell activity, identifying areas where radar return signals are weakened or attenuated by intense precipitation 
(or large areas of lesser precipitation) and may not fully reflect the weather behind a storm.

• Weather Alert that looks ahead for intense cell activity in the 80-320 nm range, even if these ranges are not 

being monitored.

PRINCIPLES OF PULSED AIRBORNE WEATHER RADAR

The term RADAR is an acronym for RAdio Detecting And Ranging.  Pulsed radar locates targets by transmitting 

a microwave pulse beam that, upon encountering a target, is reflected back to the radar receiver as a return 
echo.  The microwave pulses are focused and radiated by the antenna, with the most intense energy in the 
center of the beam and decreasing intensity near the edge.  The same antenna is used for both transmitting and 
receiving.  The returned signal is then processed and displayed on the MFD.

Radar detection is a two-way process that requires 12.36 µs for the transmitted microwave pulses to travel 

out and back for each nautical mile of target range.  It takes 123.6 µs for a transmitted pulse to make the round 
trip if a target is ten nautical miles away.

Airborne weather radar should be used to avoid severe weather, not for penetrating severe weather.  The 

decision to fly into an area of radar targets depends on target intensity, spacing between the targets, aircraft 
capabilities, and pilot experience.  Pulse type weather radar detects only precipitation, not clouds or turbulence.  
The display may indicate clear areas between intense returns, but this does not necessarily mean it is safe to fly 
between them.  Only Doppler radar can detect turbulence.

Airborne weather radar has other capabilities beyond weather detection.  It also has the ability to detect and 

provide distance to cities, mountains, coastlines, rivers, lakes, and oceans.

Содержание G950































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для G950

True TDBD-72-4 Installation Manual preview
TDBD-72-4
Бренд: True Страницы: 17
uAvionix microLink Quick Start Manual preview
microLink
Бренд: uAvionix Страницы: 6
Kelly Manufacturing 102-0202-04-10 Installation And Operation Manual preview
102-0202-04-10
Бренд: Kelly Manufacturing Страницы: 13
ViewSonic VA2626wm - 26" LCD Monitor User Manual preview
VA2626wm - 26" LCD Monitor
Бренд: ViewSonic Страницы: 26
Alto-Shaam TY-96 Operation And Care Manual preview
TY-96
Бренд: Alto-Shaam Страницы: 41
Igloo JOR Series Instruction Manual preview
JOR Series
Бренд: Igloo Страницы: 16
Garmin GMA 350 Pilot'S Manual preview
GMA 350
Бренд: Garmin Страницы: 33
Garmin GMA 340 Installation Manual preview
GMA 340
Бренд: Garmin Страницы: 43
Garmin GMA 350 Installation Manual preview
GMA 350
Бренд: Garmin Страницы: 64
Garmin GMA 245 Installation Manual preview
GMA 245
Бренд: Garmin Страницы: 76
Garmin GDL 69 Pilot'S Manual preview
GDL 69
Бренд: Garmin Страницы: 78
Garmin GMX 200 Pilot'S Manual & Reference preview
GMX 200
Бренд: Garmin Страницы: 148
Garmin GIA 63 Installation Manual preview
GIA 63
Бренд: Garmin Страницы: 141
Garmin GNC 420 Pilot'S Manual & Reference preview
GNC 420
Бренд: Garmin Страницы: 258
Garmin GNS 430 Pilot'S Manual & Reference preview
GNS 430
Бренд: Garmin Страницы: 266
Garmin GI 275 Pilot'S Manual preview
GI 275
Бренд: Garmin Страницы: 250
Garmin G600 Pilot'S Manual preview
G600
Бренд: Garmin Страницы: 240
Garmin G500H Pilot'S Manual preview
G500H
Бренд: Garmin Страницы: 366

Бренды по названию

Популярные бренды

Загрузить еще бренды