Garmin G500H, Руководство пилота

Страница: 141 / 366

3-67
190-01150-02 Rev. J Garmin G500H Pilot’s Guide
For
ewor
d
Sec 1
System
Sec 2
PFD
Sec 3
MFD
Sec 4
Hazar
d
Avoidance
Sec 5
Additional
Featur
es
Sec 6
Annun.
& Alerts
Sec 7
Symbols
Sec 8
Glossary
Appendix A
Appendix B
Index
4) Turn the small
MFD
knob to select the desired data item and press
ENT
.
5) Press the small MFD knob to remove the cursor.
To restore factory default settings for data fields on the Active Flight Plan Page:
1) While viewing the Active Flight Plan Page of the FPL page group, press MENU
to display the Active Flight Plan Page Options window.
2) Turn the large MFD knob to highlight “Restore Defaults?” and then press ENT .
Figure 3-95 Active Flight Plan Page Menu Option Selection to Restore Defaults
3.3.1.3 Setting the Altitude Minimums Alerter
The Altitude Alerting function provides the pilot with visual and aural alerts
(if interfaced to an audio panel) when approaching the Selected Altitude. See
2.4.4 Minimum Descent Altitude/Decision Height Alerting section of the PFD
section for more details.
1) While viewing the Charts Page of the FPL page group, press the
Menu
key.
With the Set Minimums item highlighted, press ENT.
2) With the Minimums Source highlighted, select the Altitude Minimums Alerter
source with small
MFD
knob.
Figure 3-96 Minimums Source Selection
3) Turn the large
MFD
knob to highlight the Altitude Minimums value. Turn the
large and small MFD knobs to change the Altitude Minimums value.
Figure 3-97 Minimums Altitude Selection
4) Press
ENT
to activate the selected value.
In dual installations, the minimums alerting altitude value may be set from
either GDU 620 and will be synchronized on both units.