manualshive.com logo in svg

Garmin G1000 NXi, Руководство пилота

Карманный GPS-навигатор Garmin G1000 NXi - это передовая технология для авиации. Попробуйте скачать бесплатный Руководство по эксплуатации с нашего сайта manualshive.com, чтобы узнать больше о этом продукте. Новая версия G1000 NXi обеспечивает улучшенное пользование функциями и навигацией.

Поделиться
Скачать
background image

190-02177-02  Rev. A

Garmin G1000 NXi Pilot’s Guide for the Cessna NAV III

SY

STEM

O

VER
VIEW

FLIGHT

INSTRUMENTS

EIS

AUDIO P

ANEL

& CNS

FLIGHT

MANA

GEMENT

HAZARD

AV

OID
ANCE

AFCS

ADDITIONAL

FEA
TURES

APPENDICES

INDEX

483

APPENDIX B

DATABASE MANAGEMENT

Database information is obtained from third party sources. Inaccuracies in the data may be discovered from 

time to time. Garmin communicates this information by issuing a Database Alert. These notifications are available 
on flygarmin.com.

Garmin requests the flight crew report any observed discrepancies related to database information. These 

discrepancies could come in the form of an incorrect procedure; incorrectly identified terrain, obstacles 
and fixes; or any other displayed item used for navigation or communication in the air or on the ground.   
  Go to flygarmin.com and select Aviation Data Error Report.

The system uses Secure Digital (SD) cards to load verious types of data. For basic flight operations, SD cards 

are required for database upldates. Use only 8 GB, 16 GB, or 32 GB cards. If it is desired to leave the card in 
the system, only Garmin, OEM, or dealer provided cards should be used. SD cards obtained elsewhere, may be 
acceptable for database loading, but must be removed when database loading is complete.

The system uses Secure Digital (SD) cards to load various types of data.  For basic flight operations, SD cards 

are required for database storage as well as database updates.  Not all SD cards are compatible with the system.  

  NOTE:  

Loading a database in the system prior to its effective date will result in the expiration date on the 

power-on screen and the effective date on the ‘Aux – Databases’ Page being displayed in amber.

LOADING UPDATED DATABASES

 CAUTION: 

Never disconnect power to the system when loading a database.  Power interruption during the 

database loading process could result in maintenance being required to reboot the system.

 NOTE:  

When loading database updates, the ‘DB Mismatch’ message will be displayed until database 

synchronization is complete, followed by turning system power off, then on.  Synchronization can be 
monitored on the ‘Aux-Database’ Page. 

Databases may be loaded through Garmin Pilot™ and Wireless Transceiver (also known as Flight Stream 

510 or FS510).  When loading databases through Garmin Pilot and the Wireless Transceiver, the Wireless 
Transceiver must be enabled on the system and the multimedia card inserted in the bottom SD  slot of  the MFD.

The cycles and dates for both standby and active databases are displayed on the “Aux – Databases” page 

on the MFD.  Any active databases with expiration dates in the past will be highlighted with amber text.  
When an expired active database has a standby database that is ready to become effective, a cyan double-sided 
arrow will be displayed between the database cycles.  When this arrow is visible, it indicates the standby and 
active databases in that row will be switched on the next power cycle, activating the current standby database.  
Databases can also be manually selected (or deselected) by highlighting a list item and pressing the 

ENT

 Key, 

provided a valid, verified standby database is present.

In some cases it may be necessary to obtain an unlock code from Garmin in order to make the database 

product functional.  It may also be necessary to have the system configured by a Garmin authorized service 
facility in order to use some database features.

Содержание G1000 NXi



























































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для G1000 NXi

Panasonic SC-AK48 Service Manual preview
SC-AK48
Бренд: Panasonic Страницы: 104
Panasonic SC-AK48 Operating Instructions Manual preview
SC-AK48
Бренд: Panasonic Страницы: 32
Everpure XC Filter Cartridge EV9613-09 Specification Sheet preview
XC Filter Cartridge EV9613-09
Бренд: Everpure Страницы: 2
Kelvinator KGC20BNA User Manual preview
KGC20BNA
Бренд: Kelvinator Страницы: 16
Raymarine Verado Installation And Commissioning Manual preview
Verado
Бренд: Raymarine Страницы: 72
Cisco Linksys DMC250 Quick Installation Manual preview
Linksys DMC250
Бренд: Cisco Страницы: 32
Cisco DMC350 Quick Installation Manual preview
DMC350
Бренд: Cisco Страницы: 64
Sony CMT-SE5 Operating Instructions Manual preview
CMT-SE5
Бренд: Sony Страницы: 72
Sony CMT-SBT40D Operating Instructions Manual preview
CMT-SBT40D
Бренд: Sony Страницы: 84
Roberts Blutune65 User Manual preview
Blutune65
Бренд: Roberts Страницы: 52
Polk Audio MIDOCK STUDIO User Manual preview
MIDOCK STUDIO
Бренд: Polk Audio Страницы: 4
RCA RS2767i/RS2767iF User Manual preview
RS2767i/RS2767iF
Бренд: RCA Страницы: 2
RCA RS2656 User Manual preview
RS2656
Бренд: RCA Страницы: 13
RCA RS2650 User Manual preview
RS2650
Бренд: RCA Страницы: 20
RCA RS2622 User Manual preview
RS2622
Бренд: RCA Страницы: 19
Marley EM-FA001 Manual preview
EM-FA001
Бренд: Marley Страницы: 45
Garmin GHP 10V Installation Instructions Manual preview
GHP 10V
Бренд: Garmin Страницы: 20
HSS Hire S220A Owner'S Manual & Installation Manual preview
S220A
Бренд: HSS Hire Страницы: 8

Бренды по названию

Популярные бренды

Загрузить еще бренды