Garmin G1000 NXi, Руководство пилота

Страница: 450 / 538

Garmin G1000 NXi Pilot’s Guide for the Cessna NAV III
190-02177-02 Rev. A
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL FEA
TURES
APPENDICES
INDEX
430
ADDITIONAL FEATURES
Selecting a channel from the channel list:
1)
While on the ‘XM Radio’ Page, press the Channel Softkey.
2) Press the CH + Softkey to go up through the list in the Channel Box, or move down the list with the CH – Softkey.
Or :
1) Push the
FMS
Knob to highlight the channel list and turn the large
FMS
Knob to scroll through the channels.
2) Press the ENT Key to activate the selected channel.
Selecting a channel directly:
1) While on the ‘XM Radio’ Page, press the
Channel
Softkey.
2)
Press the Direct CH Softkey. The channel number in the Active Channel Box is highlighted.
3) Press the numbered softkeys located on the bottom of the display to directly select the desired channel number.
4) Press the
ENT
Key to activate the selected channel.
CATEGORY
The Category Box of the ‘XM Radio’ Page displays the currently selected category of audio. Categories of
channels such as jazz, rock, or news can be selected to list the available channels for a type of music or other
contents. One of the optional categories is Presets to view channels that have been programmed.
Selecting a category:
1) Press the Category Softkey on the ‘XM Radio’ Page.
2) Press the
CAT +
and
CAT -
Softkeys to cycle through the categories.
Or :
Turn the small FMS Knob to display the Categories list. Highlight the desired category with the small FMS Knob
and press the
ENT
Key. Selecting All Categories places all channels in the list.
PRESETS
Up to 15 channels from any category can be assigned a preset number. The preset channels are selected by
selecting the Presets and More Softkeys. Then the preset channel can be selected directly and added to the
channel list for the Presets category.
Setting a preset channel number:
1)
On the ‘XM Radio’ Page, while listening to an Active Channel that is wanted for a preset, press the Presets
Softkey to access the first five preset channels (
Preset 1 - Preset 5
).
2) Press the
More
Softkey to access the next five channels (
Preset 6 – Preset 10
), and again to access the
last five channels ( Preset 11 – Preset 15 ). Pressing the More Softkey repeatedly cycles through the preset
channels.
3) Press any one of the (
Preset 1 - Preset 15
) softkeys to assign a number to the active channel.
4) Press the Set Softkey on the desired channel number to save the channel as a preset.
Pressing the Back Softkey, or 45 seconds of softkey inactivity, returns the system to the top level softkeys.