Garmin G1000 NXi, Руководство по эксплуатации кабины

Страница: 87 / 220

Garmin G1000 NXi Cockpit Reference Guide for the da62 190-02622-00 Rev. A 63
Flight Management
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Annun/Alerts
Appendix
Index
Flight
Instruments
EIS
Nav/Com/
XP
d
R/
a
udio
Flight
Management
Hazar
d
avoidance
a
FCS
a
dditional
Featur
es
a
bnormal
o
per
ation
a
nnun/
a
lerts
a
ppendix
Index
5)
Press the
ENT
Key. ‘Activate Compensation?’ is highlighted.
6)
Press the
ENT
Key.
The compensated altitudes for the approach are shown in
the flight plan.
Cancelling temperature compensation setting for approach loaded altitudes:
1)
From the ‘FPL – Active Flight Plan’ Page, press the MENU Key. The ‘Page Menu’ Window
is displayed.
2) Turn the FMS Knob to highlight ‘Temperature Compensation’.
3) Press the ENT Key. The ‘Temperature Compensation’ Window is displayed.
4)
Press the
ENT
Key. ‘Cancel Compensation?’ is highlighted.
5)
Press the
ENT
Key.
t
empeRAtuRe
C
ompensAtion FoR
A
ppRoACh
m
inimums
Entering a temperature compensated minimum into an approach:
1)
From the ‘FPL – Active Flight Plan’ Page, press the PRoC Key. The ‘Procedures’ Window is
displayed.
2)
Turn the large
FMS
Knob to highlight ‘Select Approach’. Press the
ENT
Key.
3)
Use the
FMS
Knob and the
ENT
Key to select the desired approach and transition.
4) Use the FMS Knob to place the flashing cursor in the ‘Minimums’ Box. Turn the small
FMS Knob to select ‘TEMP COMP’. Press the ENT Key.
5) Turn the small FMS Knob to enter the minimums altitude. Press the ENT Key. The cursor
is placed in the ‘TEMP AT <destination airport>’ Field.
6) Turn the small FMS Knob to enter the temperature at the destination. Press the ENT Key.
7)
Press the
ENT
Key to Load or Activate the approach. The approach is added to the active
flight plan, and the temperature compensated minimums are displayed on the PFD.
TRIP PLaNNING
Selecting automatic or manual page mode:
From the ‘Aux - Trip Planning’ Page, press the
auto
Softkey or the
Manual
Softkey; or
press the
MENU
Key, highlight ‘Auto Mode’ or ‘Manual Mode’, and press the
ENT
Key.
Selecting flight plan or waypoint mode:
From the ‘Aux - Trip Planning’ Page, press the
FPL
Softkey or the
WPTs
Softkey; or press
the MENU Key, highlight ‘Flight Plan Mode’ or ‘Waypoints Mode’, and press the ENT Key.
Selecting a flight plan and leg for trip statistics:
1)
From the ‘Aux - Trip Planning’ Page, press the FMS Knob to activate the cursor in the ‘FPL’
Field.
2)
Turn the small
FMS
Knob to select the desired flight plan number.