Garmin G1000 NXi, Руководство по эксплуатации кабины

Страница: 86 / 220

Garmin G1000 NXi Cockpit Reference Guide for the da62 190-02622-00 Rev. A 62
Flight Management
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Annun/Alerts
Appendix
Index
Flight
Instruments
EIS
Nav/Com/
XP
d
R/
a
udio
Flight
Management
Hazar
d
avoidance
a
FCS
a
dditional
Featur
es
a
bnormal
o
per
ation
a
nnun/
a
lerts
a
ppendix
Index
3)
Press the
FMS
Knob to activate the cursor and turn the
FMS
Knob to highlight the flight
plan to be edited.
4) Press the Edit Softkey; or press the MENU Key, select ‘Edit Flight Plan’ and press the
ENT
Key. The ‘FPL - Stored Flight Plan’ Page is displayed.
5) Highlight and remove the approach:
a) Turn the large FMS Knob to highlight the white header of the approach.
b)
Press the
CLR
Key. The ‘Remove <procedure name> from flight plan?’ window is
displayed.
or
:
a) Press the MENU Key to display the ‘Page Menu’ Window and turn the FMS Knob to
highlight ‘Remove Approach’.
b) Press the ENT Key. The ‘Remove <procedure name> from flight plan?’ window is
displayed.
6) With ‘OK’ highlighted, press the ENT Key. To cancel the request, press the CLR Key, or
highlight ‘Cancel’ and press the ENT Key.
7)
Press the
FMS
Knob to remove the flashing cursor.
Missed approach
activating a missed approach in the active flight plan:
Press the Go-Around Button.
or :
Fly past the MAP, and press the
SUSP
Softkey on the PFD.
or
:
1)
Press the PRoC Key.
2) Turn the FMS Knob to highlight ‘Activate Missed Approach’.
3) Press the
ENT
Key.
Temperature Compensated altitude
t
empeRAtuRe
C
ompensAtion FoR AppRoACh Altitudes
Manually setting temperature compensation for approach loaded altitudes:
1)
From the ‘FPL – Active Flight Plan’ Page, press the
MENU
Key. The ‘Page Menu’ Window
is displayed.
2)
Turn the
FMS
Knob to highlight ‘Temperature Compensation’.
3) Press the ENT Key. The ‘Temperature Compensation’ Window is displayed with the
temperature highlighted.
4)
Use the small
FMS
Knob to change the
‘Temperature at <airport>’ Field. The
compensated altitude is computed as the temperature is selected.