Garmin G1000 NXi, Руководство по эксплуатации кабины

Страница: 58 / 220

Garmin G1000 NXi Cockpit Reference Guide for the da62 190-02622-00 Rev. A 34
Flight Management
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Annun/Alerts
Appendix
Index
Flight
Instruments
EIS
Nav/Com/
XP
d
R/
a
udio
Flight
Management
Hazar
d
avoidance
a
FCS
a
dditional
Featur
es
a
bnormal
o
per
ation
a
nnun/
a
lerts
a
ppendix
Index
b)
Use the
FMS
Knob or the waypoint submenu to enter the identifier, facility, or city
name of the waypoint. The active flight plan is modified as each waypoint is entered.
5) Repeat step number 4 to enter each additional enroute waypoint.
6) When all waypoints have been entered, press the FMS Knob to remove the cursor (if
required).
Creating a stored flight plan:
1)
From the MFD, press the FPL Key.
2) Turn the small FMS Knob clockwise to display the ‘FPL - Flight Plan Catalog’ Page.
3)
Press the
New
Softkey; or press the
MENU
Key, highlight ‘Create New Flight Plan’, and
press the ENT Key to display a blank flight plan for the first empty storage location.
4)
Select the origin airport and runway.
a) Highlight the field below the Origin header to enter the origin airport identifier using
the
FMS Knob.
b) Use the FMS Knob or the waypoint submenu to enter the identifier, facility, or city
name of the origin waypoint.
c) Press the ENT Key. The ‘Set Airport and Runway’ Window is displayed with the
‘Runway’ Field highlighted.
d)
Turn the small
FMS
Knob to select the runway, and press the
ENT
Key.
e)
Press the
ENT
Key again to add the origin airport/runway to the flight plan.
5) Repeat step number 4 for the destination airport and runway.
6) Select the enroute waypoints.
a)
Highlight the location to insert the waypoint using the
FMS
Knob (If the enroute
header is selected, the new waypoint is placed following the header. If an enroute
waypoint or the dashes are selected, the new waypoint will be placed ahead of the
selected item.)
b)
Use the
FMS
Knob or the waypoint submenu to enter the identifier, facility, or city
name of the waypoint.
c)
Press the
ENT
Key. The stored flight plan is modified as each waypoint is entered.
7) Repeat step number 6 to enter each additional enroute waypoint.
8) When all waypoints have been entered, press the FMS Knob to remove the cursor.
FLIGHT PLaN WayPoINT aNd aIRWay ModIFICaTIoNS
Flight Plan Waypoints
A
dding
W
Aypoints