Garmin G1000 NXi Cockpit Reference Guide for the da62
190-02622-00 Rev. A
33
Flight Management
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Annun/Alerts
Appendix
Index
Flight
Instruments
EIS
Nav/Com/
XP
d
R/
a
udio
Flight
Management
Hazar
d
avoidance
a
FCS
a
dditional
Featur
es
a
bnormal
o
per
ation
a
nnun/
a
lerts
a
ppendix
Index
Cancelling a direct-to:
1)
Press the
¯
Key to display the ‘Direct To’ Window.
2)
Press the
MENU
Key.
3)
With ‘Cancel Direct-To NAV’ highlighted, press the
ENT
Key. If a flight plan is still active,
the system resumes navigating the flight plan along the closest leg.
FLIGHT PLaNNING
FLIGHT PLaN VIEWS
active Flight Plan Views
Changing the flight plan view:
1)
Press the
FPL
Key on the MFD to display the ‘FPL - Active Flight Plan’ Page.
2)
Press the
View
Softkey to display the
Wide
,
Narrow
,
Leg-Leg
, and
CUM
Softkeys.
3)
Press the
CUM
Softkey to view cumulative waypoint distance, or press the
Leg-Leg
Softkey to view leg-to-leg waypoint distance.
4)
Press the
Wide
Softkey to display the wide view, or press the
Narrow
Softkey to display
the narrow view.
5)
Press the
Back
Softkey to return to the top level active flight plan softkeys..
CREaTING a FLIGHT PLaN
Creating an active flight plan:
1)
Press the
FPL
Key. Press the small
FMS
Knob to activate the cursor (only on MFD).
2)
Select the origin airport and runway (as required).
a)
Highlight the field below the Origin header to enter the origin airport identifier using
the
FMS
Knob.
b)
Use the
FMS
Knob or the waypoint submenu to enter the identifier, facility, or city
name of the origin waypoint.
c)
Press the
ENT
Key. The ‘Set Airport and Runway’ Window is displayed with the
‘Runway’ Field highlighted.
d)
Turn the small
FMS
Knob to select the runway, and press the
ENT
Key.
e)
Press the
ENT
Key again to add the origin airport/runway to the flight plan.
3)
Repeat step number 2 for the destination airport and runway.
4)
Select the enroute waypoints.
a)
Highlight the location to insert the waypoint using the
FMS
Knob (If the enroute
header is selected, the new waypoint is placed following the header. If an enroute
waypoint or the dashes are selected, the new waypoint will be placed ahead of the
selected item).
Содержание G1000 NXi
