Garmin G1000 NXi, Руководство по эксплуатации кабины

Страница: 51 / 220

Garmin G1000 NXi Cockpit Reference Guide for the da62 190-02622-00 Rev. A 27
Flight Management
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Annun/Alerts
Appendix
Index
Flight
Instruments
EIS
Nav/Com/
XP
d
R/
a
udio
Flight
Management
Hazar
d
avoidance
a
FCS
a
dditional
Featur
es
a
bnormal
o
per
ation
a
nnun/
a
lerts
a
ppendix
Index
Nearest Non-airport Waypoints
Viewing Nearest Non-airport Waypoints:
1)
Turn the large FMS Knob to select the ‘NRST’ Page Group.
2)
Turn the small
FMS
Knob to select the ‘NRST - Nearest Intersections, NDB, VOR, VRP, or
User WPTS’ Page.
3)
Press the
FMS
Knob to display the flashing cursor in the ‘Nearest INT, NDB, VOR, VRP, or
User’ Box,
or:
If the ‘NRST - Nearest VOR’ Page is displayed, to display the flashing cursor:
Press the
VoR Softkey.
or
:
a) Press the MENU Key
b) Highlight ‘Select VOR Window’, and press the ENT Key.
4)
If needed, press the
ENT
Key or turn either
FMS
Knob as needed to select an identifier.
5)
Press the
FMS
Knob to remove the flashing cursor.
Creating User Waypoints
Creating user waypoints from the ‘WPT - User WPT Information’ Page:
1)
Press the New Softkey, or press the MENU Key and select ‘Create New User Waypoint’.
2)
Enter a user waypoint name (up to six characters).
3)
Press the
ENT
Key. The current aircraft position is the default location of the new
waypoint.
4) If desired, define the type and location of the waypoint in one of the following ways:
Select “RAD/RAD” using the small FMS Knob, press the ENT Key, and enter the two
reference waypoint identifiers and radials into the ‘Reference Waypoints’ Window
using the
FMS Knobs.
or :
Select “RAD/DIS” using the small
FMS
Knob, press the
ENT
Key, and enter the
reference waypoint identifier, the radial, and the distance into the ‘Reference
Waypoints’ Window using the
FMS Knobs.
or
:
Select “LAT/LON” using the small FMS Knob, press the ENT Key, and enter the
latitude and longitude into the ‘Information’ Window using the
FMS
Knobs.
5) Press the ENT Key to accept the new waypoint.
6) If desired, change the storage method of the waypoint to temporary by moving the cursor
to “Temporary” and pressing the
ENT Key to check or uncheck the box.
7)
Press the
FMS
Knob to remove the flashing cursor.