Garmin G1000 NXi, Руководство по эксплуатации кабины

Страница: 141 / 220

Garmin G1000 NXi Cockpit Reference Guide for the da62 190-02622-00 Rev. A 117
additional Features
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Annun/Alerts
Appendix
Index
Flight
Instruments
EIS
Nav/Com/
XP
d
R/
a
udio
Flight
Management
Hazar
d
avoidance
a
FCS
a
dditional
Featur
es
a
bnormal
o
per
ation
a
nnun/
a
lerts
a
ppendix
Index
1)
From the ‘Map - IVR/VFR Charts’ Page, press the MENU Key to display the ‘Page Menu.’
2) Select ‘Display VFR’, ‘Display IFR Low’ or ‘Display IFR High’ to display the desired chart.
3) Press the
ENT
Key.
Modifying the IFR Low, IFR High, and VFR Charts settings:
1)
Select
the ‘Map - IFR/VFR Charts’ Page.
2)
Press
the Map opt Softkey to display the Map Options.
3)
Press
the Traffic Softkey to enable/disable traffic overlaid onto the charts displayed.
SaTELLITE TELEPHoNE aNd daTaLINK SERVICES (oPTIoNaL)
REGISTERING THE SySTEM WITH GaRMIN CoNNEXT
Registering the system for datalink services:
1)
Using the
FMS
Knob, select the ‘Aux - System Status’ Page.
2)
Touch the LRU Softkey, if not already selected.
3)
Press the FMS Knob to activate the cursor.
4) Use the large FMS Knob to view ‘GSR 1.’
5) Note the GSR 1 Serial Number. This number will be needed when contacting Garmin
Connext to establish the account.
6)
Also note the System ID. It is found in the Airframe Box on the ‘Aux - System Status
Page’. The System ID will also be needed when contacting Garmin Connext.
7)
Contact Garmin Connext to establish an account and receive an access code.
dISaBLE/ENaBLE IRIdIUM TRaNSCEIVER
disabling/enabling telephone and low speed data services:
1)
Turn the large FMS Knob on the MFD to select the ‘Aux’ Page group.
2) Turn the small
FMS
Knob to select the ‘Aux - Satellite Phone’ Page.
3)
If necessary, press the Phone Softkey to display the ‘Aux - Telephone’ Page.
4)
Press the MENU Key. The ‘Page Menu’ Window is now displayed.
5) Turn the FMS Knob to select ‘Disable Iridium Transmission’ in the menu list.
6) Press the
ENT
Key. The Iridium transceiver is now disabled.
7)
To enable the Iridium transceiver, repeat steps 1 through 4, then select ‘Enable Iridium
Transceiver.’
CoNTaCTS
Creating a new contact:
1)
With the ‘Aux - Telephone Phone’ Page displayed, press the FMS Knob to display the
cursor.
2) If necessary, turn either FMS Knob to place the cursor on ‘New Entry.’