Garmin G1000 Pilot’s Guide for the Diamond DA62
190-01895-00 Rev. A
242
FLIGHT MANAGEMENT
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL FEA
TURES
APPENDICES
INDEX
Viewing available approaches at an airport:
1)
From the Airport Information Page (first page in the WPT group), press the
APR
Softkey. The Approach
Information Page is displayed, defaulting to the airport displayed on the Airport information Page.
2)
To select another airport, press the
FMS
Knob to activate the cursor, enter an identifier/facility name/city, and
press the
ENT
Key.
3)
Press the
FMS
Knob, then turn the large
FMS
Knob to highlight the Approach. The approach is previewed on
the map.
4)
Turn the small
FMS
Knob to view the available approaches. Press the
ENT
Key to select the approach. The
cursor moves to the Transition box. The approach is previewed on the map.
5)
Turn the small
FMS
Knob to view the available transitions. Press the
ENT
Key to select the transition. The cursor
moves to the Minimums box. The approach is previewed on the map.
6)
Turn the small
FMS
Knob to select minimums on or off. Press the
ENT
Key.
a)
When minimums are selected on, the cursor moves to the minimum altitude field . Use the small
FMS
Knob to
select the altitude. Press the
ENT
Key.
b)
If temperature compensated minimums was selected, the cursor moves to the temperature field. Use the small
FMS
Knob to select the temperature. Press the
ENT
Key. The cursor moves to the Sequence box. The approach
is previewed on the map.
Or
:
a)
When minimums are selected off, the cursor moves to the Sequence box. The approach is previewed on the
map.
7)
Press the
INFO-1
or the
INFO-2
Softkey to return to the Airport Information Page.
Loading an approach into the active flight plan from the Nearest Airport Page:
1)
Select the Nearest Airports Page.
2)
Press the
FMS
Knob, then turn the large
FMS
Knob to highlight the desired nearest airport. The airport is
previewed on the map.
3)
Press the
APR
Softkey; or press the
MENU
Key, highlight ‘Select Approach Window’, and press the
ENT
Key.
4)
Turn the
FMS
Knob to highlight the desired approach.
5)
Press the
LD APR
Softkey; or press the
MENU
Key, highlight ‘Load Approach’, and press the
ENT
Key. The
Approach Loading Page is displayed with the transitions field highlighted.
6)
Turn the
FMS
Knob to highlight the desired transition, and press the
ENT
Key.
7)
Minimums
a)
To set ‘MINIMUMS’, turn the small
FMS
Knob to select ‘BARO’ or ‘TEMP COMP’ or ‘RAD ALT’, and press the
ENT
Key. Turn the small
FMS
Knob to select the altitude, and press the
ENT
Key.
b)
If ‘TEMP COMP’ was selected, the cursor moves to the temperature field. Turn the small
FMS
Knob to select the
temperature, and press the
ENT
Key.
Or
:
Содержание G1000 Diamond DA62
Страница 2: ......
Страница 14: ...Garmin G1000 Pilot s Guide for the Diamond DA62 190 01895 00 Rev A x TABLE OF CONTENTS Blank Page...
Страница 629: ......